| Item Number |
Description |
| CLR000TB |
THREADED-BODY PUSH CLAMP SOLID |
| CLR000V |
HIGH-PRESSURE IN-LINE FILTER |
| CLR000WS |
SPRING ADVANCED WORK SUPPORT W |
| CLR001TB |
THREADED-BODY PUSH CLAMP |
| CLR001WS |
WORK SUPPORT |
| CLR010PS |
CLR-010-PS |
| CLR0353921 |
PNEUMATIC POSITION MONITORING, FOR MANIFOLD MOUNTING, NW 2 mm SWITCHING RANGE 2 TO 9 mm, 10 bar |
| CLR0354003SCA |
CLAMPING ARM ASSY FOR 1885-XX1 |
| CLR0354106SCA |
CLAMPING ARM W/ THREAD 124.5 X |
| CLR0354107SCA |
CLAMPING ARM W/ THREAD 183 X 9 |
| CLR0354152 |
CLAMPING ARM W/ THREAD 58 x 28 x 17 mm, FOR 1843-FXXX, 350 bar |
| CLR0354153 |
CLAMPING ARM W/ THREAD 75 x 36 x 22 mm, FOR 1844-FXXX, 350 bar |
| CLR010TB |
THREADED-BODY PUSH CLAMP |
| CLR0184003 |
ANGLE BRACKET, COMPLETE, FOR LINE 1843 |
| CLR0184004 |
ANGLE BRACKET, COMPLETE, FOR LINE 1844 |
| CLR0184006 |
ANGLE BRACKET, COMPLETE, FOR 1 |
| CLR0184007 |
ANGLE BRACKET, COMPLETE, FOR 1 |
| CLR0184008 |
ANGLE BRACKET, COMPLETE, FOR 1 |
| CLR0354154 |
CLAMPING ARM W/ THREAD 93 x 45 x 26 mm, FOR 1845-FXXX, 350 bar |
| CLR0354155 |
CLAMPING ARM W/ THREAD 120 x 60 x 28 mm, FOR 1846-FXXX, 350 bar |
| CLR0354700SCA |
ARM ASSEMBLY FOR -3XX SWG CLAM |
| CLR0354701SCA |
HALF ARM TAPPED-3XXX SWG CLAMP |
| CLR0354702SCA |
ARM ASSEMBLY FOR -5XX SWG CLAM |
| CLR0354703SCA |
HALF ARM TAPPED -5XX SWG CLAMP |
| CLR0187301ASCA |
STANDARD ARM (1873-XXX-ASC) |
| CLR0187401ASCA |
FLANGEA(1874-X01) |
| CLR0187402ASCA |
LONG ARM (1874-X04) |
| CLR0187501ASCA |
STANDARD ARM (1875-XXX-ASC) |
| CLR0187502ASCA |
LONG ARM (1875-X04) |
| CLR0187601ASCA |
STANDARD ARM (1876-XXX-ASC) |
| CLR0354704SCA |
ARM ASSEMBLY FOR -7XX SWG CLAM |
| CLR0354705SCA |
HALF ARM TAPPED -7XX SWG CLAMP |
| CLR0361012F |
AIR-VENT PLUG (1/8 BSPP) |
| CLR041VA |
BOLT KIT SMALL MANIFOLD 1 VALV |
| CLR042VA |
BOLT KIT SMALL MANIFOLD 2 VALV |
| CLR0431703G |
CLAMPING SET FOR BORE CLAMPS, |
| CLR0431703H |
CLAMPING SET FOR BORE CLAMPS, |
| CLR0431704B |
CLAMPING SET FOR BORE CLAMPS, |
| CLR043VA |
CLR-043-VA |
| CLR044VA |
CLR-044-VA |
| CLR045VA |
CLR-045-VA |
| CLR0460668CPA |
CLEANING DEVICE 150 X 60 X 55 |
| CLR0460799TBN |
THREADED BODY NIPPLE |
| CLR046VA |
CLR-046-VA |
| CLR051VA |
CLR-051-VA |
| CLR052VA |
CLR-052-VA |
| CLR053VA |
CLR-053-VA |
| CLR054VA |
CLR-054-VA |
| CLR055VA |
CLR-055-VA |
| CLR056VA |
CLR-056-VA |
| CLR058VA |
CLR-058-VA |
| CLR0974000CC |
SUBASSEMBLY CONTROL CYLINDER, |
| CLR0974002CC |
CONTROL CYLINDER W/SUB ASSY (M |
| CLR0974003CC |
CONTROL CYLINDER 400-2300 |
| CLR10000 |
MASTER JAW SET OF TWO 6.0 IN. |
| CLR100AFR |
FILTER REGULATOR PNEUMATIC W/G |
| CLR100FIL |
FILTER ELEMENT (CLR-100-V) |
| CLR100FRL |
FILTER REGULATOR LUBRICATOR |
| CLR100GA |
PRESSURE GAUGE |
| CLR100PS |
CLR-100-PS |
| CLR100TB |
THREADED-BODY PUSH CLAMP SOLID |
| CLR100TBA |
MOUNTING BLOCK FOR THREADED-BO |
| CLR100TL |
TUBING CUTTER |
| CLR100V |
MINI INLINE FILTER BI-DIRECTI |
| CLR100WS |
WORK SUPPORT |
| CLR101GA |
GAUGE O - 9000 W/ STRAIGHT TUBE |
| CLR101TB |
THREADED-BODY PUSH CLAMP TAPPE |
| CLR101TBA |
MOUNTING BLOCK FOR THREADED-BO |
| CLR101WS |
WORK SUPPORT |
| CLR102GA |
GAUGE 0 - 9000 W/ ELBOW TUBE |
| CLR102TBA |
CLR-102-TBA |
| CLR103GA |
HYDRAULIC FITTING GAUGE ADAPTOR, 37-DEGREE FLARE |
| CLR103TBA |
CLR-103-TBA |
| CLR104BP |
4-PORT MANIFOLD (W/O FITTINGS) |
| CLR104F |
MANIFOLD & VALVE ADAPTOR STAND |
| CLR104TBA |
CLR-104-TBA |
| CLR105F |
4-PORT MANIFOLD W/ 5-MALE FITT |
| CLR105FAED |
air-extractor-drier w/ float drain |
| CLR106BP |
6-PORT MANIFOLD (W/O FITTINGS) |
| CLR106F |
MANIFOLD 6-BRANCH |
| CLR1073010 |
Built-in piston, + 32 x 8 mm stroke, S.A., w/ spring return, 250 bar |
| CLR107F |
CLR-107-F |
| CLR108TBA |
CLR-108-TBA |
| CLR110TB |
THREADED-BODY PUSH CLAMP SWIVE |
| CLR1313770 |
TH/COLLAR PUSH CLMP FOR 370-TC |
| CLR1315770 |
TH/COLLAR PUSH CLMP FOR 570-TC |
| CLR1316770 |
UNIVERSAL CYLINDER S/A |
| CLR1458711 |
THREADED-BODY PUSH CLAMP CLR-8 |
| CLR1460701 |
THREADED-BODY CYLINDER S.A., W |
| CLR1460702TB |
THREADED-BODY PUSH CLAMP SOL P |
| CLR1460703TB |
THREADED-BODY PUSH CLAMP TAP P |
| CLR1460712TB |
THREADED-BODY PUSH CLAMP SW PL |
| CLR1461702TB |
THREADED-BODY PUSH CLAMP SOL P |
| CLR1461703TB |
THREADED-BODY PUSH CLAMP TAP P |
| CLR1462702TB |
THREADED-BODY PUSH CLAMP SOL P |
| CLR1462703TB |
NONSTANDARD METRIC EQUIV. 1462 |
| CLR1463702TB |
THREADED-BODY PUSH CLAMP SOL P |
| CLR1463703TB |
THREADED-BODY PUSH CLAMP SW PL |
| CLR1463712TB |
THREADED-BODY PUSH CLAMP SW PL |
| CLR1464702TB |
THREADED-BODY PUSH CLAMP SOL P |
| CLR1464703TB |
THREADED-BODY PUSH CLAMP TAP P |
| CLR1464712TB |
THREADED-BODY PUSH CLAMP SW PL |
| CLR1471701TBD |
THREADED-BODY PUSH CLAMP D.A. |
| CLR1471711TBD |
TBPC D/A W/VIT SEALS-1471-701 |
| CLR1472701TBD |
THREADED-BODY PUSH CLAMP D.A. |
| CLR1472711TBD |
TBPC D/A W/VIT SEALS 1471-701 |
| CLR1473701TBD |
THREADED-BODY PUSH CLAMP D.A. |
| CLR1473711TBD |
TBPC D/A W/VIT SEALS-1471-701 |
| CLR1474701TBD |
THREADED-BODY PUSH CLAMP DA |
| CLR1474711TBD |
THREADED BODY PUSH CLAMP W/VIT |
| CLR1511005 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1511700BC |
BLOCK CLAMP S/A W/ .31 IN STK |
| CLR1511701BC |
BLK CLP S/A 8MM STROKE W/ VITO |
| CLR1511705 |
BLOCK CYLINDER, S.A., 16 X 8 |
| CLR1511711BC |
BLK CLP S/A 16MM STROKE W/O SP |
| CLR1511720BC |
BLOCK CLAMP .78 STK S/A FITT. |
| CLR1511721BC |
BLK CLP S/A 20MM STROKE W/ VIT |
| CLR1511725 |
Block cylinder, s.a., 16 x 20 mm stroke |
| CLR1511760BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1511761BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1513005 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1513025 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1513700BC |
BLOCK CLAMP S/A W/ .31 IN STK |
| CLR1513701BC |
BLK CLP S/A 8MM STROKE W/ VITO |
| CLR1513705 |
BLOCK CYLINDER, S.A., 25 X 8 |
| CLR1513705B |
BLOCK CYLINDER, S.A. |
| CLR1513710BC |
BLK CLP S/A 20MM STROKE W/O SP |
| CLR1513711BC |
BLK CLP S/A 20MM STROKE W/O SP |
| CLR1513720BC |
BLOCK CYLINDER FOR CLR-320-BC |
| CLR1513721BC |
BLK CLP S/A 20MM STROKE W/ VIT |
| CLR1513725 |
BLOCK CYLINDER, S.A., 25 X 2 |
| CLR1513725BBC |
BLOCK CYLINDER SA MM BOTTOM |
| CLR1513760BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1514125 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1514700BC |
BLOCK CLAMP S/A W/O 4 HOLES |
| CLR1514701BC |
BLK CLP S/A 10MM STROKE W/ VIT |
| CLR1514705 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1514705B |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1514710BC |
BLK CLP S/A 25MM STROKE W/O SP |
| CLR1514711BC |
BLK CLP S/A 25MM STROKE W/ VIT |
| CLR1514720BC |
BLOCK CLAMP S/A W/ .78 IN STK |
| CLR1514721BC |
BLK CLP S/A 20MM STROKE W/ VIT |
| CLR1514725 |
BLOCK CYLINDER, S.A., 32 X 2 |
| CLR1514760BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1514761BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1515005 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1515025 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1515700BC |
BLK CLP S/A .38IN STK |
| CLR1515700KBC |
BLOCK CYLINDER MAN MNT S/A |
| CLR1515701BC |
BLK CLP W/VIT SEALS (500-BC) |
| CLR1515705 |
BLOCK CYLINDER, S.A., 40 X 1 |
| CLR1515710BC |
BLK CLP S/A 25MM STROKE W/O SP |
| CLR1515711BC |
BLK CLP S/A 25MM STROKE W/O SP |
| CLR1515720BC |
BLOCK CLAMP S/A W/ .78 IN STK |
| CLR1515721BC |
BLK CLP S/A 20MM STROKE W/ VIT |
| CLR1515725 |
BLOCK CYLINDER, S.A., W/ SPRIN |
| CLR1515760BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1515761BC |
BLK CLP S/A 50MM STROKE W/O SP |
| CLR1516005 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1516025 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1516700BC |
BLOCK CLAMP S/A W/ .38 STK |
| CLR1516701BC |
BLK CLP S/A 12MM STK W/VITON S |
| CLR1516706BC |
BLOCK CLAMP SA VITON W/FTG |
| CLR1516710BC |
BLK CLP S/A 25MM STROKE W/O SP |
| CLR1516711BC |
BLK CLP S/A 25MM STROKE W/O SP |
| CLR1516720BC |
BLOCK CLAMP S/A W/ .78 IN STK |
| CLR1516721BC |
BLK CLP S/A 20MM STROKE W/ VIT |
| CLR1516725 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1517005 |
BLOCK CYL., S.A., SPRING RETUR |
| CLR1517005S |
BLOCK CYL. S.A., SPRING RETURN, PISTON + 63 mm, STROKE 12 mm, 4 MOUNTING AND 2 CROSS HOLES, FLANGE S, 500 bar |
| CLR1517700KBC |
BLOCK CYLINDER MAN MNT S/A |
| CLR1517701BC |
BLK CLP S/A 12MM STROKE W/ VIT |
| CLR1517710BC |
BLK CLP S/A 30MM STROKE W/O SP |
| CLR1517711BC |
BLK CLP S/A 30MM STROKE W/O SP |
| CLR1517730BC |
BLOCK CLAMP S/A W/ 1 IN STK |
| CLR1517731BC |
BLK CLP S/A 25MM STROKE W/ VIT |
| CLR1517770BC |
BLK CLP S/A 63MM STROKE W/O SP |
| CLR1517771BC |
BLK CLP S/A 63MM STROKE W/O SP |
| CLR1518700BC |
BLK CLP S/A 12MM STROKE |
| CLR1518701BC |
BLK CLP S/A 12MM STROKE W/ VIT |
| CLR1518705BBC |
BLOCK CLAMP S/A MANIFOLD MOUNT |
| CLR1518710BC |
BLK CLP S/A 32MM STROKE W/O SP |
| CLR1518711BC |
BLK CLP S/A 32MM STROKE W/O SP |
| CLR1518740BC |
BLK CLP S/A 32MM STROKE |
| CLR1518741BC |
BLK CLP S/A 32MM STROKE W/ VIT |
| CLR1518780BC |
BLK CLP S/A 80MM STROKE W/O SP |
| CLR1518781BC |
BLK CLP S/A 80MM STROKE W/O SP |
| CLR1519700BC |
BLK CLP S/A 12MM STROKE |
| CLR1519701BC |
BLK CLP S/A 12MM STROKE W/ VIT |
| CLR1519710BC |
BLK CLP S/A 40MM STROKE W/O SP |
| CLR1519711BC |
BLK CLP S/A 40MM STROKE W/O SP |
| CLR1519740BC |
BLK CLP S/A 32MM STROKE |
| CLR1519741BC |
BLK CLP S/A 32MM STROKE W/ VIT |
| CLR1519790BC |
BLK CLP S/A 100MM STROKE W/O S |
| CLR1519791BC |
BLK CLP S/A 100MM STROKE W/O S |
| CLR1525030KBCD |
BLOCK CYLINDER, D.A., 40 X 2 |
| CLR1541105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1541165 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1541700BCD |
BLOCK CLAMP D/A W/ .63 IN STK |
| CLR1541701BCD |
BLK CLP D/A 16MM STROKE W/ VIT |
| CLR1541705 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1541760BCD |
BLOCK CLAMP D/A W/ 2 IN STK |
| CLR1541760L |
BLOCK CLAMP DA MAN MOUNT (SIDE |
| CLR1541761BCD |
BLK CLP D/A 50MM STROKE W/ VIT |
| CLR1541765 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1541765BBCD |
BLOCK CLAMP DA MAN MT BOTTOM |
| CLR1541790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1541791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1543105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1543165 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1543210 |
BLOCK CYLINDER, D.A., FKM, PISTON + 25 mm, STROKE 160 mm, 4 MOUNTING AND 4 CROSS HOLES, 500 bar |
| CLR1543210CD |
BLOCK CLAMP D.A., 160 MM STROK |
| CLR1543210L |
BLOCK CYLINDER, D.A., FKM, PISTON + 25 mm, STROKE 160 mm, 4 MOUNTING AND 4 CROSS HOLES, FLANGE L, 500 bar |
| CLR1543265 |
BLOCK CYLINDER D/A OUTER THREAD |
| CLR1543700BCD |
NONSTANDARD METRIC EQUIV. 1543 |
| CLR1543700KBCD |
BLOCK CYLINDER DA MM BROAD SID |
| CLR1543701BCD |
BLOCK CYLINDER (300-BCD) W/ VI |
| CLR1543705 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1543705BBCD |
BL CL D/A M/M BOTTOM |
| CLR1543760BCD |
BLOCK CYLINDER, D.A., PISTON |
| CLR1543761BCD |
BLOCK CYLINDER D/A W/VITON 2"S |
| CLR1543765 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1543765BBCD |
BC CL D/A M/M BOTTOM |
| CLR1543790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1543791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1544105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1544111BCD |
BLK CLP D/A 200MM STROKE W/ VI |
| CLR1544165 |
BLOCK CYLINDER, D.A., PISTON |
| CLR0187726 |
CLAMP ARM 80MM FOR 1877-106/-206 |
| CLR0188517 |
INDUCTIVE PROXIMITY SWITCHES 2 |
| CLR0341100 |
METAL WIPER, COMPLETE FOR 1895-XXX-VMH35 AND SIMILAR |
| CLR0341104 |
METALLIC WIPER, COMPLETE, FOR SIZE 1843 |
| CLR0341107 |
METALLIC WIPER FOR 1893-XXXX-XXXX |
| CLR0341108 |
SHARP-EDGED ORIFICE + 0.6 mm W/ SEALING RING FOR 1942-20X |
| CLR1544165BDBCD |
BLK CLP MAN MNT BOTTOM W/4 M10 |
| CLR1544165H30BCD |
1544-165 STROKE LIMITED TO 30 |
| CLR1544210 |
BLOCK CYLINDER, D.A., FKM, PISTON + 32 mm, STROKE 160 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1544211 |
BLOCK CYLINDER, D.A., FKM, PISTON + 32 mm, STROKE 200 mm, 4 MOUNTING AND 4 CROSS HOLES, 500 bar |
| CLR1544211C |
BLK CLP D/A 200MM STK W/VITON |
| CLR1544265 |
BLOCK CYLINDER, D.A., OUTER THREAD, + 32 mm, STROKE 50 mm, PIPE THREAD, 500 bar |
| CLR1544407S |
BLOCK CYL., D.A., EXT. PISTON ROD, + 32 mm, STROKE 25 mm, FLANGE S, FKM SEALS, 500 bar |
| CLR1544700BCD |
BLK CLP D/A 1.0 STRK |
| CLR1544700KBCD |
BLOCK CYLINDER DA MM BROAD SID |
| CLR1544701BCD |
BLOCK CYLINDER D/A W/ VITON SE |
| CLR1544705 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1544705BBCD |
BLOCK CYLINDER D/A MAN MNT BOT |
| CLR1544706BCD |
BLOCK CYLINDER DA W/VITON SEAL |
| CLR1544760BCD |
BLK CLP D/A 2" STROKE |
| CLR1544761BCD |
BLK CLP D/A 50MM STROKE W/ VIT |
| CLR1544765 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1544790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1544791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1545105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1545110BCD |
BLK CLP D/A W/6.3 INCH STK |
| CLR1545165 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1545195D |
BLOCK CYLINDER,D.A.,PISTON 40M |
| CLR1545210 |
BLOCK CYLINDER, D.A., FKM, PISTON + 40 mm, STROKE 160 mm, 4 MOUNTING AND 4 CROSS HOLES, 500 bar |
| CLR1545210DBCD |
BLK CLP D/A 160MM STK W/VITON |
| CLR1545265 |
BLOCK CYLINDER, D.A., OUTER THREAD, + 40 mm, STROKE 50 mm, PIPE THREAD, 500 bar |
| CLR1545408B |
BLOCK CYL., D.A., EXT. PISTON ROD, + 40 mm, STROKE 50 mm, FLANGE B, FKM SEALS, 500 bar |
| CLR1545513SH15BCD |
BLK CLP D/A MAN MNT BOTTOM SID |
| CLR1545700BCD |
BLOCK CLAMP D/A WITH 2 MTG HOL |
| CLR1545701BCD |
BLK CLP D/A 25MM STROKE W/ VIT |
| CLR1545705 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1545706BCD |
BLOCK CYLINDER DA W/VITON |
| CLR1545760BCD |
BLOCK CLAMP D/A W/ 2 IN STK |
| CLR1545761BCD |
BLOCK CYLINDER (CLR-560-BCD)VI |
| CLR1545765 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1545790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1545791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1546105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1546165 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1546195H60BCD |
1546-195 W/STROKE LIMITED TO 6 |
| CLR1546210L |
BLOCK CYLINDER, D.A., PISTON + 50 mm, STROKE 160 mm, 2 CROSS HOLES, FLANGE L, VITON SEALS, 500 bar |
| CLR1546265 |
BLOCK CYLINDER FOR CLR-1546-265-BCD |
| CLR1546700BCD |
BLOCK CLAMP D/A W/O ADD MNT HO |
| CLR1546701BCD |
BLOCK CYLINDER, D.A., FKM, PIS |
| CLR1546705 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1546706BCD |
BLOCK CLAMP W/ VITON SEALS |
| CLR1546760BCD |
BLOCK CLAMP D/A W/ 2 IN STK |
| CLR1546761BCD |
BLK CLP D/A 50MM STROKE W/ VIT |
| CLR1546765 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1546790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1546791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR15471018 |
BLOCK CLAMP D/A W/POS MON ALUM |
| CLR1547105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1547175 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1547276B |
BLOCK CYLINDER, D.A., OUTER THREAD, + 63 mm, STROKE 63 mm, FLANGE B, VITON SEALS, 500 bar |
| CLR1547700BCD |
BLOCK CLAMP W/ BROAD SIDE HOLE |
| CLR1547701BCD |
BLK CLP D/A 30MM STROKE W/ VIT |
| CLR1547705 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1547706BCD |
CLR-700-BCD WITH VITON SEALS |
| CLR1547770BCD |
BLOCK CLAMP D/A W/ 2.5 IN STK |
| CLR1547771BCD |
BLK CLP D/A 63MM STROKE W/ VIT |
| CLR1547775 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1547776BCD |
BLK CLP D/A W/ 2.5 INCH STK & |
| CLR1547790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1547791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1548185 |
BLOCK CYLINDER, D.A., PISTON + 80 mm, STROKE 80 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1548408L |
BLOCK CYL., D.A., EXT. PISTON ROD, + 80 mm, STROKE 50 mm, FLANGE L, FKM SEALS, 500 bar |
| CLR1548700BCD |
BLK CLP D/A 32MM STROKE |
| CLR1548701BCD |
BLK CLP D/A 32MM STROKE W/ VIT |
| CLR1548780BCD |
BLK CLP D/A 80MM STROKE |
| CLR1548781BCD |
BLK CLP D/A 80MM STROKE W/ VIT |
| CLR1548790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1548791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1549105 |
BLOCK CYLINDER, D.A., PISTON |
| CLR1549195 |
BLOCK CYLINDER, D.A., PISTON + 100 mm, STROKE 100 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1549210 |
BLOCK CYLINDER, D.A., FKM, PISTON + 100 mm, STROKE 160 mm, 4 MOUNTING AND 4 CROSS HOLES, 500 bar |
| CLR1549700BCD |
BLK CLP D/A 40MM STROKE |
| CLR1549701BCD |
BLK CLP D/A 40MM STROKE W/ VIT |
| CLR1549790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1549791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1550105 |
BLOCK CYLINDER, D.A., PISTON + 125 mm, STROKE 40 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1550195 |
BLOCK CYLINDER, D.A., PISTON + 125 mm, STROKE 100 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1550210 |
BLOCK CYLINDER, D.A., FKM, PISTON 125mm. DIA., STROKE 160mm. 4 CROSS AND 4 LONGITUDINAL MOUNTING HOLES, 500BAR. |
| CLR1550700BCD |
BLK CLP D/A 40MM STROKE |
| CLR1550701BCD |
BLK CLP D/A 40MM STROKE W/ VIT |
| CLR0341111 |
METALLIC WIPER, COMPLETE, FOR |
| CLR0346815 |
MOUNTING BODY FOR 194X-3XX, G1 |
| CLR0346816 |
MOUNTING BODY FOR 194X-4XX, G1 |
| CLR0346817 |
MOUNTING BODY FOR 194X-5XX, G1 |
| CLR0346818 |
MOUNTING BODY FOR 194X-6XX, G1 |
| CLR1550790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1804130 |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1804130A |
COMPACT CLAMP SIZE 4, 10.5 kN, 250 bar |
| CLR1804130B |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1804131 |
COMPACT CLAMP, SIZE 4, 10.5 kN, W/O COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1804131B |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1804210 |
COMPACT CLAMP, SIZE 4, 10.5 kN, MANIFOLD MOUNT, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1804210B |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1804210C |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1804230 |
COMPACT CLAMP, SIZE 4, 10.5 kN, MANIFOLD MOUNT, W/ COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1804230B |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1804230C |
COMPACT CLAMP, SIZE 4, 10.5 KN |
| CLR1824201 |
FLAT CLAMP 16 kN, DOME HEAD CL. LEVER, 500 bar |
| CLR1824202 |
FLAT CLAMP 16 kN, W/ SWIVEL CONT. BOLT, 500 bar |
| CLR1824261 |
FLAT CLAMP 25 kN, DOME HEAD CL. LEVER, 500 bar |
| CLR1824262 |
FLAT CLAMP 25 kN, W/ SWIVEL CONT. BOLT, 500 bar |
| CLR1825010 |
MINI HINGE CLAMP, D.A., W/O CL. LEVER, INSERT VERSION, 250 bar |
| CLR1825110 |
HINGE CLAMP D.A., SIZE 1, CARTRIDGE-TYPE VERSION, W/O CL. LEVER, 250 bar |
| CLR1825111 |
HINGE CLAMP D.A., SIZE 1, CARTRIDGE-TYPE VERSION, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825112 |
HINGE CLAMP D.A., SIZE 1, CARTRIDGE-TYPE VERSION, LONG CL. LEVER, 250 bar |
| CLR1825130 |
HINGE CLAMP D.A., SIZE 1, FITTING CONNECTION AT THE BACK, W/O CL. LEVER, 250 bar |
| CLR1825131 |
HINGE CLAMP D.A., SIZE 1, FITTING CONNECTION AT THE BACK, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825132 |
HINGE CLAMP D.A., SIZE 1, FITTING CONNECTION AT THE BACK, LONG CL. LEVER, 250 bar |
| CLR1825141 |
HINGE CLAMP D.A., SIZE 1, FITT.CONN BACK, EXTENDED PISTON ROD, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825142E |
HINGE CLAMP D.A., SIZE 1, FITT.CONN BACK, EXTENDED PISTON ROD, LONG CL. LEVER, IND. POS. MON., 250 bar |
| CLR1825150 |
HINGE CLAMP D.A., SIZE 1, FITTING CONNECTION AT 3 SIDES, W/O CL. LEVER, 250 bar |
| CLR1825151 |
HINGE CLAMP D.A., SIZE 1, FITTING CONNECTION AT 3 SIDES, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825152 |
HINGE CLAMP D.A., SIZE 1, FITTING CONNECTION AT 3 SIDES, LONG CL. LEVER, 250 bar |
| CLR1825160 |
HINGE CLAMP D.A., SIZE 1, FITT.CONN AT 3 SIDES, EXTENDED PISTON ROD, W/O CL. LEVER, 250 bar |
| CLR1825160E |
HINGE CLAMP D.A., SIZE 1, FITT.CONN AT 3 SIDES, EXTENDED PISTON ROD, W/O CL. LEVER, IND. POS. MON., 250 bar |
| CLR1825210 |
HINGE CLAMP D.A., SIZE 2, CARTRIDGE-TYPE VERSION, W/O CL. LEVER, 250 bar |
| CLR1825220 |
HINGE CLAMP D.A., SIZE 2, CARTRIDGE W/ EXTENDED PISTON ROD, W/O CL. LEVER, 250 bar |
| CLR1825220P |
HINGE CLAMP D.A., SIZE 2, CARTRIDGE W/ EXTENDED PISTON ROD, W/O CL. LEVER, PNEUM. POS. MON., 250 bar |
| CLR1825230 |
HINGE CLAMP D.A., SIZE 2, FITTING CONNECTION AT THE BACK, W/O CL. LEVER, 250 bar |
| CLR1825231 |
HINGE CLAMP D.A., SIZE 2, FITTING CONNECTION AT THE BACK, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825232 |
HINGE CLAMP D.A., SIZE 2, FITTING CONNECTION AT THE BACK, LONG CL. LEVER, 250 bar |
| CLR1825242 |
HINGE CLAMP D.A., SIZE 2, FITT.CONN AT THE BACK, EXT. PISTON ROD, LONG CLAMPING LEVER, 250 bar. |
| CLR1825242E |
HINGE CLAMP D.A., SIZE 2, FITT.CONN EXT. PISTON ROD, IND. POS. MON., LONG CL. LEVER, 250 bar |
| CLR1825242P |
HINGE CLAMP D.A., SIZE 2, FITT.CONN BACK, EXT. PISTON, PNEU. POS. MON., LONG CL. LEVER, 250 bar |
| CLR1825251 |
HINGE CLAMP D.A., SIZE 2, FITT.CONN FITTING CONNECTION AT 3 SIDES, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825252 |
HINGE CLAMP D.A., SIZE 2, FITTING CONNECTION AT 3 SIDES, LONG CL. LEVER, 250 bar |
| CLR1825262 |
HINGE CLAMP D.A., SIZE 2, FITT.CONN AT 3 SIDES, EXTENDED PISTON ROD, LONG CL. LEVER, 250 bar |
| CLR1825262E |
HINGE CLAMP D.A., SIZE 2, FITT.CONN 3 SIDES, EXT. PISTON, IND. POS. MON., LONG CL. LEVER, 250 bar |
| CLR1825310 |
HINGE CLAMP D.A., SIZE 3, CARTRIDGE-TYPE VERSION, W/O CL. LEVER, 250 bar |
| CLR1825311 |
HINGE CLAMP D.A., SIZE 3, CARTRIDGE-TYPE VERSION, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825312 |
HINGE CLAMP D.A., SIZE 3, CARTRIDGE-TYPE VERSION, LONG CL. LEVER, 250 bar |
| CLR1825320 |
HINGE CLAMP D.A., SIZE 3, W/ E |
| CLR1825322 |
HINGE CLAMP D.A., SIZE 3, CARTRIDGE EXT. PISTON ROD, LONG CL. LEVER, 250 bar |
| CLR1825330 |
HINGE CLAMP D.A., SIZE 3, FITTING CONNECTION AT THE BACK, W/O CL. LEVER, 250 bar |
| CLR1825331 |
HINGE CLAMP D.A., SIZE 3, FITTING CONNECTION AT THE BACK, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825332 |
HINGE CLAMP D.A., SIZE 3, FITTING CONNECTION AT THE BACK, LONG CL. LEVER, 250 bar |
| CLR1825340 |
HINGE CLAMP D.A., SIZE 3, FITT |
| CLR1825340E |
HINGE CLAMP D.A., SIZE 3, FITT.CONN BACK, EXT. PISTON, IND. POS. MON., W/O CL. LEVER, 250 bar |
| CLR1825341 |
HINGE CLAMP D.A., SIZE 3, FITT.CONN BACK, EXT. PISTON ROD, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825342 |
HINGE CLAMP D.A., SIZE 3, FITT.CONN BACK, EXT. PISTON ROD, LONG CL. LEVER, 250 bar |
| CLR1825342E |
HINGE CLAMP D.A., SIZE 3, FITT.CONN BACK, EXT. PISTON, IND. POS. MON., LONG CL. LEVER, 250 bar |
| CLR1825350 |
HINGE CLAMP D.A., SIZE 3, FITTING CONNECTION AT 3 SIDES, W/O CL. LEVER, 250 bar |
| CLR1825351 |
HINGE CLAMP D.A., SIZE 3, FITTING CONNECTION AT 3 SIDES, CL. LEVER W/ SW. CONTACT BOLT, 250 bar |
| CLR1825412 |
HINGE CLAMP, D.A., SIZE 4, CAR |
| CLR1826010 |
MINI-HINGE CLAMP, D.A., W/O CL. LEVER, CARTRIDGE-TYPE VERSION, 70 bar |
| CLR1826011 |
MINI-HINGE CLAMP, D.A., CL. LEVER W/ SW. CONTACT BOLT, CARTRIDGE-TYPE VERSION, 70 bar |
| CLR1826232EXD |
HINGE CLAMP D/A SIZE 2 |
| CLR1826G7131 |
HINGE CLAMP, D.A., SIZE 1, CLA |
| CLR1826G7132 |
HINGE CLAMP, D.A., SIZE 1, CLA |
| CLR1826G7332 |
HINGE CLAMP, D.A., SIZE 3, CLA |
| CLR1826G7430 |
HINGE CLAMP, D.A., SIZE 4, CLA |
| CLR1826G7440 |
HINGE CLAMP, D.A., SIZE 4, CLA |
| CLR1826G7541 |
HINGE CLAMP, D.A., SIZE 5, CLA |
| CLR1826G7542 |
HINGE CLAMP, D.A., SIZE 5, CLA |
| CLR1826L7132 |
HINGE CLAMP, D.A., SIZE 1, CLA |
| CLR1826L7332 |
HINGE CLAMP, D.A., SIZE 3, CLA |
| CLR1826L7430 |
HINGE CLAMP, D.A., SIZE 4, CLA |
| CLR1826R7131 |
HINGE CLAMP, D.A., SIZE 1, CLA |
| CLR1826R7332 |
HINGE CLAMP, D.A., SIZE 3, CLA |
| CLR1826R7432 |
HINGE CLAMP, D.A., SIZE 4, CLA |
| CLR1843A000023M |
CLR-1843-A000-023M |
| CLR1843A090L23M |
CLR-1843-A090-L23M |
| CLR1843A090R23M |
CLR-1843-A090-R23M |
| CLR1843B000023M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1843B090L23M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1843B090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843C000023M |
CLR-1843-C000-023M |
| CLR1843C090L23M |
CLR-1843-C090-L23M |
| CLR1843C090R23M |
CLR-1843-C090-R23M |
| CLR1843D000023M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1843D090L23M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1843D090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843F000023M |
CLR-1843-F000-023M |
| CLR1843F090L23 |
SWING CLAMP, D.A., 90ª CCW, STROKE 23 mm, D23/D16 mm, 350 bar |
| CLR1843F090L23M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1843F090R23 |
SWING CLAMP, D.A., 90ª CW, STROKE 23 mm, D23/D16 mm, 350 bar |
| CLR1843F090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843H000023M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1843H090L23M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1843H090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843L000023 |
SWING CLAMP, D.A., 0ª, TYPE L, BOTTOM FLANGE, CL. STROKE 12, SW. STROKE 11 mm, 350 bar |
| CLR1843L000023M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1843L090L23 |
SWING CLAMP, D.A., 90ª CCW, TYPE L, BOTTOM FLANGE, CL. STROKE 12, SW. STROKE 11 mm, 350 bar |
| CLR1843L090L23M |
CLR-1843-L090-L23M |
| CLR1843L090R23 |
SWING CLAMP, D.A., 90ª CW, TYPE L, BOTTOM FLANGE, CL. STROKE 12, SW. STROKE 11 mm, 350 bar |
| CLR1843L090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843M000023M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1843M090L23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1550791BCD |
BLK CLP D/A 100MM STROKE W/ VI |
| CLR1551005 |
BLOCK CYLINDER, D.A., PISTON + 160 mm, STROKE 40 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1551090L |
BLOCK CYLINDER, D.A., PISTON + 160 mm, STROKE 100 mm, 4 CROSS HOLES, FLANGE L, 500 bar |
| CLR1551095 |
BLOCK CYLINDER, D.A., PISTON + 160 mm, STROKE 100 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1552095 |
BLOCK CYLINDER, D.A., PISTON + 200 mm, STROKE 100 mm, 4 MOUNTING AND 2 CROSS HOLES, 500 bar |
| CLR1552210 |
BLOCK CYLINDER, D.A., FKM, PISTON + 200 mm, STROKE 160 mm, 4 MOUNTING AND 4 CROSS HOLES, 500 bar |
| CLR1843M090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843N000023M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1843N090L23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1843N090R23M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844A000024M |
CLR-1844-A000-024M |
| CLR1844A090L24M |
CLR-1844-A090-L24M |
| CLR1844A090R24M |
CLR-1844-A090-R24M |
| CLR1844B000024M |
0 DEG TF W/SWITCH ROD MW |
| CLR1844B090L24M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1844B090R24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844C000024M |
CLR-1844-C000-024M |
| CLR1844C090L24M |
CLR-1844-C090-L24M |
| CLR1844C090R24M |
CLR-1844-C090-R24M |
| CLR1844D000024M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1844D090L24M |
CLR-1844-D090-L24M |
| CLR1844D090R24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844F000024M |
0 DEG CARTRIDGE W/METAL WIPER |
| CLR1844F090L24 |
SWING CLAMP, D.A., 90ª CCW, D28/ 20 mm, STROKE 24 mm, CARTRIDGE TYPE, 350 bar |
| CLR1844F090L24M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1844F090R24 |
SWING CLAMP, D.A., 90ª CW, D28/ 20 mm, STROKE 24 mm, CARTRIDGE TYPE, 350 bar |
| CLR1844F090R24M |
90 DEG CW CARTRIDGE MW |
| CLR1844H000024M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1844H090L24M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1844H090R24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844L000024M |
0 DEG FB W/O PM |
| CLR1844L090L24 |
SWING CLAMP, D.A., 90ª CCW, TYPE L, BOTTOM FLANGE, CL. STROKE 12, SW. STROKE 12 mm, 350 bar |
| CLR1844L090L24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844L090R24 |
SWING CLAMP, D.A., 90ª CW, TYPE L, BOTTOM FLANGE, CL. STROKE 12, SW. STROKE 12 mm, 350 bar |
| CLR1844L090R24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844M000024M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1844M090L24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844M090R24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844N000024M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1844N090L24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1844N090R24M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845A000030M |
CLR-1845-A000-030M |
| CLR1552790BCD |
BLK CLP D/A 100MM STROKE |
| CLR1553160BCD |
BLOCK CYLINDER |
| CLR1554160BCD |
BLOCK CYLINDER |
| CLR1555160BCD |
BLOCK CYLINDER |
| CLR1556160BCD |
BLOCK CYLINDER |
| CLR1571700BC |
BLOCK CYLINDER |
| CLR1845A090L30M |
CLR-1845-A090-L30M |
| CLR1845A090R30M |
CLR-1845-A090-R30M |
| CLR1845B000030M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1845B090L30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845B090R30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845C000030M |
CLR-1845-C000-030M |
| CLR1845C090L30M |
CLR-1845-C090-L30M |
| CLR1845C090R30M |
CLR-1845-C090-R30M |
| CLR1845D000030M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1845D090L30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845D090R30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845F000030M |
CLR-1845-F000-030M |
| CLR1845F045L30 |
SWING CLAMP, D.A., 45 CCW, 6 |
| CLR1845F045R30 |
SWING CLAMP, D.A., 45 CW, 6 M |
| CLR1845F075L30M |
SWING CLAMP, D.A., 75 CCW, W/ |
| CLR1845F075R30M |
SWING CLAMP, D.A., 75 CW, W/ |
| CLR1845F090L30 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 15 mm, SW. STROKE 15 mm, CARTRIDGE TYPE, STURDY MECH., 350 bar. |
| CLR1845F090L30M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1845F090R30 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 15 mm, SW. STROKE 15 mm, CARTRIDGE TYPE, STURDY MECH., 350 bar |
| CLR1845F090R30M |
90 DEG CW CARTRIDGE MW |
| CLR1845H000030M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1845H090L30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845H090R30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845L000030 |
SWING CLAMP, D.A., 0ª, TYPE L, BOTTOM FLANGE, CL. STROKE 15 mm, SW. STROKE 15 mm, 350 bar |
| CLR1845L000030M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1845L090L30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845L090R30 |
SWING CLAMP, D.A., 90ª CW, TYPE L, BOTTOM FLANGE, CL. STROKE 15, SW. STROKE 15 mm, 350 bar |
| CLR1845L090R30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845M000030M |
CLR-1845-M000-030M |
| CLR1845M090L30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845M090R30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845N000030M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1845N090L30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1845N090R30 |
SWING CLAMP, D.A., 90ª CW, TYPE N, BOTTOM FLANGE, CL. STROKE 15, SW. STROKE 15 mm, 350 bar |
| CLR1845N090R30M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846A000036M |
CLR-1846-A000-036M |
| CLR1846A090L36M |
CLR-1846-A090-L36M |
| CLR1846A090R36M |
CLR-1846-A090-R36M |
| CLR1846B000036M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1846B090L36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846B090R36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846C000036M |
CLR-1846-C000-036M |
| CLR1846C090L36M |
CLR-1846-C090-L36M |
| CLR1846C090R36M |
CLR-1846-C090-R36M |
| CLR1846D000036M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1846D090L36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846D090R36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846F000036M |
SWING CLAMP D.A., 0 DEG W/ M.W |
| CLR1846F090L36M |
CLR-1846-F090-L36M |
| CLR1846H000036M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1846H090L36M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1846H090R36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846L000036M |
CLR-1846-L000-036M |
| CLR1846L090L36 |
SWING CLAMP, D.A., 90ª CCW, TYPE L, BOTTOM FLANGE, CL. STROKE 15, SW. STROKE 21 mm, 350 bar |
| CLR1846L090L36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846L090R36 |
SWING CLAMP, D.A., 90ª CW, TYPE L, BOTTOM FLANGE, CL. STROKE 15, SW. STROKE 21 mm, 350 bar |
| CLR1846L090R36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846M000036M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1846M090L36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846M090R36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846N000036M |
SWING CLAMP, D.A., 0, MW, TYP |
| CLR1846N090L36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1846N090R36M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1849703SC |
SWG CLP COMPACT S/A TOP FLANGE |
| CLR1849713SC |
SWING CLAMP 90 DEG S/A |
| CLR1849723SC |
SWG CLP COMPACT S/A CCW TOP FL |
| CLR1849733SC |
SWING CLAMP 60 DEG S/A |
| CLR1849753SC |
SWING CLAMP 45 DEG S/A |
| CLR1850104MSCD |
SC D/A 0 DEGREE SWING MW |
| CLR1850105MSCD |
SWING CLAMP D/A 0 DEG SWING WI |
| CLR1850124M |
SWG CLP D/A 90CCW MAN MNT -TOP |
| CLR1853T000016 |
SWING CLAMP, D.A., 0, TOP FLA |
| CLR1853T090L16 |
SWING CLAMP, D.A., 90 CCW, TO |
| CLR1853T090L16M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1853T090R16 |
SWING CLAMP, D.A., 90 CW, TOP |
| CLR1853T090R16M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1854Q090R21M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1854T090L21 |
SWING CLAMP, D.A., 90 CCW, TO |
| CLR1854T090L21M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1854T090R21M |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1863T090L16 |
SWING CLAMP, D.A., 90 CCW, TO |
| CLR1866Q000027 |
SWING CLAMP, D.A., 0, TOP FLA |
| CLR1866Q090L27 |
Swing clamp, D.A., 90ª ccw, w/o MW, top flange, type Q - w/ switch rod, Max. pull force 17 kN, + 52/30 mm, cl. stroke 10 |
| CLR1866Q090R27 |
Swing clamp, D.A., 90ª cw, w/o MW, top flange, type Q - w/ switch rod, Max. pull force 17 kN, + 52/30 mm, cl. stroke 10 |
| CLR1867Q090L29 |
Swing clamp, D.A., 90ª ccw, w/o MW, top flange, type Q - w/ switch rod, Max. pull force 27.6 kN, + 65/36 mm, cl. stroke |
| CLR1867Q090R29 |
Swing clamp, D.A., 90ª cw, w/o MW, top flange, type Q - w/ switch rod, Max. pull force 27.6 kN, + 65/36 mm, cl. stroke 1 |
| CLR1872304ASC |
Air swing clamp, 90ª cw, threaded-body, w/ lock rings, w/ arm |
| CLR1872404ASC |
Air swing clamp, 90ª ccw, threaded-body, w/ lock rings, w/ arm |
| CLR1873204ASC |
AIR SWING CLAMP |
| CLR1873304ASC |
Air swing clamp, 90ª cw, threaded-body, w/ lock rings, w/ arm |
| CLR1873404ASC |
Air swing clamp, 90ª ccw, threaded-body, w/ lock rings, w/ arm |
| CLR1874246KASC |
PNEUMATIC-SWING CLAMP, D.A., 0 |
| CLR1874404ASC |
Air swing clamp, 90ª ccw, threaded-body, w/ lock rings, w/ arm |
| CLR1875304ASC |
Air swing clamp, 90ª cw, threaded-body, w/ lock rings, w/ arm |
| CLR1875404ASC |
Air swing clamp, 90ª ccw, threaded-body, w/ lock rings, w/ arm |
| CLR1876104ASC |
AIR SWING CLAMP |
| CLR1876304ASC |
Air swing clamp, 90ª cw, threaded-body, w/ lock rings, w/ arm |
| CLR1876404ASC |
Air swing clamp, 90ª ccw, threaded-body, w/ lock rings, w/ arm |
| CLR1877404ASC |
AIR SWING CLAMP |
| CLR1882730SC |
MINI SWING CLAMP SINGLE ACTING |
| CLR1882740SC |
SWING CLAMP MINI S/A CCW W/AR |
| CLR1885324SC |
SWING CLAMP, S.A., 60 CW, CL. |
| CLR1571705BC |
BLOCK CYLINDER |
| CLR1574105SBC |
BLK PULL CLP S/A 10MM STK MAN |
| CLR1574700BC |
BLOCK CYLINDER REPLACED BY CLR |
| CLR1575705BC |
BLOCK CYLINDER ASSY |
| CLR1576700BC |
BLOCK PULL CLAMP W/1 807-F |
| CLR1576705BC |
BLOCK CYLINDER |
| CLR1577105 |
PULL CYLINDER, S.A., + 63 x 12 mm STROKE, 4 MOUNTING HOLES, 500 bar |
| CLR1577105BC |
BLOCK CYLINDER (METRIC) |
| CLR1800110 |
MINI COMPACT CLAMP, D.A., CARTRIDGE TYPE, Max. CL. FORCE 1.3 kN, Max. 200 bar |
| CLR1801110 |
COMPACT CLAMP, SIZE 1, 2.5 kN, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1801111 |
COMPACT CLAMP, SIZE 1, 2.5 kN, W/O COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1801111B |
COMPACT CLAMP, SIZE 1, 2.5 KN, |
| CLR1885424SC |
SWING CLAMP, S.A., 60 CCW, CL |
| CLR1893101M |
THREADED-BODY SWING CLAMP, D.A |
| CLR18931335000 |
Swing clamp, D.A., 60ª ccw, w/o MW, pendulum eye, top flange, piston rod + 20 mm, w/o switch rod, cl. stroke 25, sw. str |
| CLR18931339000 |
Swing clamp, D.A., 30ª ccw, w/o MW, pendulum eye, top flange, piston rod + 20 mm, w/o switch rod, cl. stroke 25, sw. str |
| CLR18931370P05M |
SWING CLAMP D/A 90 DEG CW SWIN |
| CLR18931371P05M |
SWING CLAMP D/A 90 DEG CCW SWI |
| CLR1893203MSCD |
SW CL DA TOP FLANGE CCW 90 W/M |
| CLR1893243MSCD |
SW CL D/A TOP FL ZERO DEGREE M |
| CLR1893423MSCD |
SW CL DA TOP FL CCW 60 DEG W/ |
| CLR1893503M |
SWING CLAMP D.A., 90 CW, MW, |
| CLR1893528M |
SWG CLP D/A CW FLANGE BASE MAN |
| CLR1893628M |
SWING CLAMP, D.A., 60 CCW, MW |
| CLR1893644M |
SWING CLAMP, D.A., 0, MW, CL. |
| CLR1893N90L12DH |
SWING CLAMP, D.A., 90ª CCW, W/O SW. STROKE, W/O SWITCH ROD, W/O METALLIC WIPER, TOP FLANGE, CLAMPING STROKE 12 mm, 350 b |
| CLR1893N90L12MH |
SWING CLAMP, D.A., 90ª CCW, W/O SW. STROKE, W/ SWITCH ROD, W/O METALLIC WIPER, TOP FLANGE, CL. STROKE 12 mm, 350 bar |
| CLR1893N90R12DH |
SWING CLAMP, D.A., 90ª CW, W/O SW. STROKE, W/O SWITCH ROD, W/O METALLIC WIPER, TOP FLANGE, CL. STROKE 12 mm, 350 bar |
| CLR1895101M |
THREADED-BODY SWING CLAMP, D.A |
| CLR1895101VDM35 |
SWING CLAMP D/A 90 DEGREE CW S |
| CLR1895101VMH35 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1895101VMM35 |
SC D/A METAL WIPER (1895-101-V |
| CLR1895102MSCD |
SWG CLP D/A CW CARTRIDGE MW |
| CLR1895103MSCD |
SW CL D/A TOP FL 90 DEG CW MW |
| CLR1895105VDH35 |
SWING CLAMP, D.A., 90 CW, CL. |
| CLR1895108VDH35 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER |
| CLR1895108VMH35 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1895121VDM35 |
SWING CLAMP, D.A., 60 CW, MW, |
| CLR1895125VDH35 |
SWING CLAMP, D.A., 60 CW, CL. |
| CLR1895131VMH35 |
SWING CLAMP, D.A., 45ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1895131VMM35 |
CLR-1895-131-VMM35 |
| CLR1895132MSCD |
SWG CLP D/A CW TOP FLANGE CART |
| CLR18951330000 |
SWING CLAMP, D.A., 90ª CW, PENDULUM EYE, W/O SWITCH ROD, CL. STROKE 22, SW. STROKE 13 mm, 500 bar |
| CLR18951331000 |
SWING CLAMP, D.A., 90ª CCW, PENDULUM EYE, W/O SWITCH ROD, CL. STROKE 22, SW. STROKE 13 mm, 500 bar |
| CLR1895133M |
CLR-1895-133M |
| CLR1895135VDH35 |
SWING CLAMP, D.A., 45 CW, CL. |
| CLR1895201M |
THREADED-BODY SWING CLAMP, D.A |
| CLR1895201VDH35 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPE |
| CLR1801130 |
COMPACT CLAMP SIZE 1 |
| CLR1801130B |
COMPACT CLAMP, SIZE 1, 2.5 KN, |
| CLR1801131 |
COMPACT CLAMP, SIZE 1, 2.5 kN, W/O COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1801131B |
COMPACT CLAMP, SIZE 1, 2.5 KN, |
| CLR1801210 |
COMPACT CLAMP, SIZE 1, 2.5 kN, MANIFOLD MOUNT, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1801230 |
COMPACT CLAMP, SIZE 1, 2.5 kN, MANIFOLD MOUNT, W/ COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1895201VMH35 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1895201VMM35 |
SW CL D/A CART W/PM METAL WIPE |
| CLR1895202MSCD |
SWG CLP D/A CCW CARTRIDGE MW |
| CLR1895203MSCD |
SW CL D/A TOP FL 90 DEG CCW MW |
| CLR1895204M |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1895205VDH35 |
SWING CLAMP, D.A., 90 CCW, CL |
| CLR1895208VMH35 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR18952120004828 |
SIM TO 1895-308 W/135 DEG SWIN |
| CLR1895225VDH35 |
SWING CLAMP, D.A., 60 CCW, CL |
| CLR1895231VMH35 |
SWING CLAMP, D.A., 45ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1895231VMM35 |
SWING CLAMP CART 45 DEG D/A PM |
| CLR1895232MSCD |
SWG CLP D/A TOP FLANGE CART MW |
| CLR1895233M |
SWING CLAMP WITH OVERLOAD PROT |
| CLR1895235VDH35 |
SWING CLAMP, D.A., 45 CCW, CL |
| CLR1895241VDH35 |
SWING CLAMP, D.A., 0ª, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER, 50 |
| CLR1895241VMH35 |
SWING CLAMP, D.A., 0ª, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, 500 |
| CLR1895245VDH35 |
SWING CLAMP, D.A., 0, CL. STR |
| CLR1895303KDH35 |
LOCKING SC D/A CW 90 DEG |
| CLR1895303KDM35 |
LOCKING SC D/A CW 90 DEG M/W |
| CLR1895303KMH35 |
CLR-1895-303-KMH35 |
| CLR1895303VDH35 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER |
| CLR1895303VDM35 |
SWING CLAMP D/A 90 DEGREE CW M |
| CLR1895303VMH35 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1895303VMM35 |
SWING CLAMP, CW, W/ POS. MON., |
| CLR1895323KDH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895323KMH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895323VDM35 |
SWING CLAMP, D.A., 60 CW, W/ |
| CLR1895333KDH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895333KMH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895333MSCD |
SWING CLAMP, D.A., 45 CW, MW, |
| CLR1895333VDH35 |
SWING CLAMP, D.A., 45ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER |
| CLR1895333VMH35 |
SWING CLAMP, D.A., 45ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1895403KDH35 |
CLR-1895-403-KDH35 |
| CLR1895403KDM35 |
CLR-1895-403-KDM35 |
| CLR1895403MSCD |
D/A TOP FL 90 DEG CCW METAL WI |
| CLR1895403VDH35 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPE |
| CLR1895403VDM35 |
SWING CLAMP D/A 90 DEGREE CCW |
| CLR1895403VMH35 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1895403VMM35 |
SWING CLAMP, CCW, W/ POS. MON. |
| CLR1895423KDH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895423KMH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895423VDM35 |
SWING CLAMP, D.A., 60 CCW, W/ |
| CLR1895433KDH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895433KMH35 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1895433MSCD |
SWING CLAMP, D.A., 45 CCW, MW |
| CLR1895433VDH35 |
SWING CLAMP, D.A., 45ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPE |
| CLR1895433VMH35 |
SWING CLAMP, D.A., 45ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1895443VMH35 |
SWING CLAMP, D.A., 0ª, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, 500 |
| CLR1895504MSCD |
SWG CLP D/A CW FB MW |
| CLR1895508VMH35 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1895509MSCD |
SWG CLP CW D/A W/METAL WIPER |
| CLR1895524MSCD |
SW CL D/A 60 DEG CW MAN MNT MW |
| CLR1895534MSCD |
SWG CLP D/A FLANGE BASE MAN NM |
| CLR1895538VMH35 |
SWING CLAMP, D.A., 45ª CW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER |
| CLR1895603M |
SWING CLAMP, D.A., 90 CCW, CL |
| CLR1895604MSCD |
SWG CLP D/A CCW FB MW |
| CLR1895608MSCD |
SWING CLAMP D/A CCW W/ METAL W |
| CLR1895608VMH35 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 22, SW. STROKE 13 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1895609MSCD |
SWG CLP CCW D/A W/METAL WIPER |
| CLR1895624MSCD |
SW CL D/A 60 DEG CCW MAN MNT M |
| CLR1895634MSCD |
SWG CLP D/A FLANGE BASE MAN MN |
| CLR1895N90L16MH |
SWING CLAMP, D.A., 90ª CCW, W/O SW. STROKE, W/ SWITCH ROD, TOP FLANGE, CL. STROKE 16 mm, 350 bar |
| CLR1895N90R16DH |
SWING CLAMP, D.A., 90ª CW, W/O SW. STROKE, W/O SWITCH ROD, TOP FLANGE, CL. STROKE 16 mm, 350 bar |
| CLR1895N90R16MH |
SWING CLAMP, D.A., 90ª CW, W/O SW. STROKE, W/ SWITCH ROD, TOP FLANGE, CL. STROKE 16 mm, 350 bar |
| CLR1896103MSCD |
SW CL D/A TOP FLANGE 90 DEG C |
| CLR1896203MSCD |
SW CL D/A TOP FLANGE 90 DEG CC |
| CLR1896203SCD |
SWING CLAMP, D.A., 90 CCW, CL |
| CLR1896303KDH36 |
LOCKING SC D/A CW 90 DEG |
| CLR1896303KDM36 |
LOCKING SC D/A CW 90 DEG M/W |
| CLR1896303KMH36 |
CLR-1896-303-KMH36 |
| CLR1896303VDH36 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER |
| CLR1896303VMH36 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1896303VMM36 |
SWING CLAMP, D.A., 90 CW, MW, |
| CLR1896309MSCD |
SWG CLP CW D/A W/METAL WIPER |
| CLR1896323KDH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896323KMH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896323VMH36 |
SWING CLAMP, D.A., 60ª CW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1896333KDH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896333KMH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896333VMH36 |
SWING CLAMP, D.A., 45ª CW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1896403KDH36 |
CLR-1896-403-KDH36 |
| CLR1896403KMH36 |
CLR-1896-403-KMH36 |
| CLR1896403VDH36 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPE |
| CLR1896403VMH36 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1896403VMM36 |
SWING CLAMP, D.A., 90 CCW, MW |
| CLR1896423KDH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896423KMH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896423VMH36 |
SWING CLAMP, D.A., 60ª CCW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1896433KDH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896433KDM36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896433KMH36 |
SWING CLAMP W/ LOCKING, D.A., |
| CLR1896433VMH36 |
SWING CLAMP, D.A., 45ª CCW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1896443VDH36 |
SWING CLAMP, D.A., 0ª, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER, 50 |
| CLR1896443VMH36 |
SWING CLAMP, D.A., 0ª, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, 500 |
| CLR1896508VMH36 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1896524M |
SWING CLAMP, D.A., 60 CW, MW, |
| CLR1896608VMH36 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 16 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1896624MSCD |
SWG CLAMP D/A CCW FB MANMNT MW |
| CLR1896N90L20DH |
SWING CLAMP, D.A., 90ª CCW, W/O SW. STROKE, W/O SWITCH ROD, TOP FLANGE, CL. STROKE 20 mm, 350 bar |
| CLR1896N90R20DH |
SWING CLAMP, D.A., 90ª CW, W/O SW. STROKE, W/O SWITCH ROD, TOP FLANGE, CL. STROKE 20 mm, 350 bar |
| CLR1897101VMH38 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1897101VMM38 |
CLR-1897-101-VMM38 |
| CLR1897105VDH38 |
SWING CLAMP, D.A., 90 CW, CL. |
| CLR1897108VMH38 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1897125VDH38 |
SWING CLAMP, D.A., 60 CW, CL. |
| CLR1897131VMM38 |
SWG CLP D/A 46 DEG CW CART PM |
| CLR1897135VDH38 |
SWING CLAMP, D.A., 45 CW, CL. |
| CLR1897201VMH38 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1897201VMM38 |
CLR-1897-201-VMM38 |
| CLR1897205VDH38 |
SWING CLAMP, D.A., 90 CCW, CL |
| CLR1897208VMH38 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1897225VDH38 |
SWING CLAMP, D.A., 60 CCW, CL |
| CLR1897231VMM38 |
SWG CLP D/A 465 DEG CCW CART P |
| CLR1897235VDH38 |
SWING CLAMP, D.A., 45 CCW, CL |
| CLR1897245VDH38 |
SWING CLAMP, D.A., 0, TOTAL S |
| CLR1897303VDH38 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPER |
| CLR1897303VMH38 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1897303VMM38 |
SWING CLAMP, D.A., 90 CW, CL. |
| CLR1897403VMH38 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1897403VMM38 |
SWING CLAMP, D.A., CCW, MW, W/ |
| CLR1897433VMH38 |
SWING CLAMP, D.A., 45ª CCW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1897508VMH38 |
SWING CLAMP, D.A., 90ª CW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER, |
| CLR1897604MSCD |
SWING CLAMP D/A CCW F/8 MM W/O |
| CLR1897608VMH38 |
SWING CLAMP, D.A., 90ª CCW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/ SWITCH ROD, W/O METALLIC WIPER |
| CLR1897638VDH38 |
SWING CLAMP, D.A., 45ª CCW, CL. STROKE 20, SW. STROKE 18 mm, REINFORCED SW. MECHANISM, W/O SWITCH ROD, W/O METALLIC WIPE |
| CLR18H |
HEAVY DUTY HYD. HOSE 18 in. |
| CLR18HCC |
HEAVY DUTY HOSE COMP ENDS 18 I |
| CLR1901001WS |
REPLACED BY PART NUMBER CLR-19 |
| CLR1903701WS |
SUPERSEDED TO THE CLR-1903-702 |
| CLR1911004WSD |
REPLACED BY CLR-1911-006, WORK |
| CLR1911005 |
WORK SUPPORT, D.A., W/ MW, 4 |
| CLR1911006 |
WORK SUPPORT, D.A., W/ MW, 4 |
| CLR1911022 |
WORK SUPPORT, 40 X 18 MM STR |
| CLR1914010WS |
WORK SUPPORT, 32 X 12 MM STR |
| CLR1914710 |
WORK SUPPORT SIDE/F & MAN/PORT |
| CLR1923701WS |
WORK SUPPORT SPRING EXT BLOCK |
| CLR1925701WS |
WORK SUPPORT BLK STYLE SP EXT. |
| CLR1940300 |
THREADED-BODY WORK SUPPORT, + 16 x 8 mm STROKE, 6.5 kN, SPRING ADVANCED, 500 bar |
| CLR1940300P |
Threaded-body work support, M30 x 1.5 mm, w/ MW, w/ venting spring area, w/ pneumatic contact control, plunger + 16 mm, |
| CLR1940400 |
THREADED-BODY WORK SUPPORT, + 20 x 10 mm STROKE, 15 kN, SPRING ADVANCED, 500 bar |
| CLR1940400P |
Threaded-body work support, M36 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plunger + |
| CLR1940501 |
THREADED-BODY WORK SUPPORT, + 28 x 10 mm STROKE, 23.5 kN, SPRING ADVANCED, 500 bar |
| CLR1940501P |
Threaded-body work support, M48 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plunger + |
| CLR1940601 |
THREADED-BODY WORK SUPPORT, + 32 x 16 mm STROKE, 42 kN, SPRING ADVANCED, 500 bar |
| CLR1940601P |
Threaded-body work support, M60 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plunger + |
| CLR1941400 |
THREADED-BODY WORK SUPPORT, + 20 x 10 mm STROKE, 15 kN, PNEUMATIC, 500 bar |
| CLR1941501 |
THREADED-BODY WORK SUPPORT, + 28 x 10 mm STROKE, 23.5 kN, PNEUMATIC, 500 bar |
| CLR1941601 |
THREADED-BODY WORK SUPPORT, + 32 x 16 mm STROKE, 42 kN, PNEUMATIC, 500 bar |
| CLR1942300 |
THREADED-BODY WORK SUPPORT, + 16 x 8 mm STROKE, 6.5 kN, HYDRAULIC PRESSURE, SPRING ADVANCED, 500 bar |
| CLR1942300P |
Threaded-body work support, M30 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plunger + |
| CLR1942305 |
Threaded-body work support, bolt + 16 x 15 mm stroke, similar to 1942-300, but stroke 15 mm, Max. 500 bar |
| CLR1942305P |
Threaded-body work support, M30 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plunger + |
| CLR1942310P |
Threaded-body work support, D.A., M30 x 1.5 mm, w/ MW, w/ pneumatic contact control, plunger + 16 mm, stroke 8 mm, Max. |
| CLR1942400 |
THREADED-BODY WORK SUPPORT, + 20 x 10 mm STROKE, 15 kN, HYDRAULIC PRESSURE, SPRING ADVANCED, 500 bar |
| CLR1942400P |
Threaded-body work support, S.A., M36 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plun |
| CLR1942410 |
Threaded-body work support, D.A., M36 x 1.5 mm, w/ MW, plunger + 20 mm, stroke 10 mm, Max. load force 15 kN, spring adva |
| CLR1942501 |
THREADED-BODY WORK SUPPORT, + 28 x 10 mm STROKE, 23.5 kN, HYDRAULIC PRESSURE, SPRING ADVANCED, 500 bar |
| CLR1942501P |
CLR-1942-501P |
| CLR1942510 |
Threaded-body work support, D.A., M48 x 1.5 mm, w/ MW, plunger + 28 mm, stroke 10 mm, Max. load force 23.5 kN, spring ad |
| CLR1942510P |
Threaded-body work support, D.A., M48 x 1.5 mm, w/ MW, w/ pneumatic contact control, plunger + 28 mm, stroke 10 mm, Max. |
| CLR1942601 |
THREADED-BODY WORK SUPPORT, + 32 x 16 mm STROKE, 42 kN, HYDRAULIC PRESSURE, SPRING ADVANCED, 500 bar |
| CLR1942601P |
Threaded-body work support, M60 x 1.5 mm, w/ MW, w/ venting of the spring area, w/ pneumatic contact control, plunger + |
| CLR1953701WS |
WORK SUPPORT AIR ADV |
| CLR1953702WS |
WORK SUPPORT HYD ADV |
| CLR1955701WS |
WORK SUPPORT AIR ADV |
| CLR1955712WS |
TH BODY WORK SUPPORT (HYD ADV) |
| CLR1957702WS |
WORK SUPPORT HYD ADV |
| CLR20000 |
MASTER JAW SET OF TWO 6.0 IN. |
| CLR200ASCA |
LOCK RING (CLR-1872-X04-ASC) |
| CLR200F |
QUICK DISCONNECT MALE |
| CLR200FR |
FINE AIR PRESSURE REGULATOR |
| CLR200SCA |
LOCK RING MINI SWING CLAMP |
| CLR200TB |
THREADED-BODY PUSH CLAMP SOLID |
| CLR200TL |
DEBURRING TOOL |
| CLR200WS |
THREADED-BODY WORK SUPPORT, FL |
| CLR2010900 |
SCREW-IN TOOL NW3 FOR COUPLING MECHANISM AND THREADED NIPPLE |
| CLR2010903 |
SCREW-IN TOOL NW8 FOR COUPLING MECHANISM AND NIPPLE |
| CLR2010904 |
SCREW-IN TOOL NW5 FOR COUPLING MECHANISM AND NIPPLE, RADIAL TOLERANCE 0.5 mm |
| CLR2010911 |
SCREW TOOLS FOR THREADED BUSHI |
| CLR201F |
CLR-201-F |
| CLR201PD |
CLR-201-PD |
| CLR201TB |
THREADED-BODY PUSH CLAMP TAPPE |
| CLR201WS |
WORK SUPPORT |
| CLR202F |
QUICK DISCONNECT FEMALE |
| CLR202PD |
CLR-202-PD |
| CLR203TL |
Deburring bit, 5/16" tube O.D., 5/16" shank, deburrs O.D. and I.D. simultaneously, adjustable chamfer, 50 - 200 rpm |
| CLR21094 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR210TB |
THREADED-BODY PUSH CLAMP SWIVE |
| CLR21116 |
SOFT JAW ALUMINUM, 5 PAIRS, W/ |
| CLR219V |
3-WAY CLAMPING VALVE H/O W/O BASE |
| CLR22094 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR220F |
QUICK DISCONNECT STANDARD NON- |
| CLR22107 |
SOFT JAW ALUMINUM, W/ SMARTSTO |
| CLR222F |
QUICK DISCONNECT STANDARD NON- |
| CLR224ACV |
AIR CHECK VALVE |
| CLR225V |
HAND OPERATED S/A CONTROL VALV |
| CLR22FL |
HYDRAULIC FLUID, 1 GAL. CONTAI |
| CLR23094 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR23106 |
SOFT JAW ALUMINUM, W/ SMARTSTO |
| CLR23108 |
SOFT JAW ALUMINUM, W/ SMARTSTO |
| CLR2321201V |
3/2 DIRECTIONAL VALVE, ND4, MA |
| CLR2321300 |
3/2 DIRECTIONAL VALVE, ND4, MANUALLY OPERATED W/ CHECK VALVE, 500 bar |
| CLR2321302V |
2-WAY CONTROL VALVE MANUAL N/C |
| CLR2360100 |
INPUT PLATE, COMPLETE, 60 x 34.5 x 22 mm LONG, 500 bar |
| CLR2360150 |
SERIES MOUNTING PLATE, 60 x 34.5 x 46 mm LONG, FOR 1 VALVE, 500 bar |
| CLR2360153 |
SERIES MOUNTING PLATE, FOR 1 VALVE, 1 PRESSURE SWITCH |
| CLR2360194 |
SERIES MOUNTING PLATE, FOR 4/3-DIRECTIONAL CONTROL VALVE, 2361-222, TWIN VALVE |
| CLR2361200V |
CLR-2361-200-V |
| CLR2361301V |
CLR-2361-301-V |
| CLR2361302V |
CLR-2361-302-V |
| CLR2361322V |
2POS 2WAY VLV N.O. GS2-1 24V |
| CLR2361802V |
3/2 SOLENOID VALVE-N.O. 110VAC |
| CLR2362200V |
SOLENOID VLV 3WAY 2POS 24V/DC W/O BASE AND P PORT CHECK. |
| CLR2362300V |
SOLENOID VALVE 24VDC 2POS 3WAY N/C W/CHECK |
| CLR2362320 |
3/2 DIR. CONTROL VALVE, G3-1R-A24, ND4, 500 bar |
| CLR24031 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR24094 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR2410125 |
SOFT JAW ALUMINUM FLIPPABLE, W |
| CLR24104 |
SOFT JAW ALUMINUM FLIPPABLE, W |
| CLR24106 |
SOFT JAW ALUMINUM FLIPPABLE, W |
| CLR24114 |
SOFT JAW ALUMINUM FLIPPABLE, 5 |
| CLR24116 |
SOFT JAW ALUMINUM FLIPPABLE, 5 |
| CLR2450004 |
CONNECTING PLATE G1/2, ND6, FOR 1 VALVE |
| CLR2450100VA |
REPLACED BY PART NUMBER CLR-24 |
| CLR2450210 |
REPLACED BY PART NUMBER CLR-24 |
| CLR2455220 |
4/3 DIRECTIONAL VALVE, ND6, 24 V DC, 315 bar |
| CLR24H |
HEAVY-DUTY HOSE |
| CLR25006 |
SOFT JAW ALUMINUM, 1.5 IN. X 2 |
| CLR25031 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR25094 |
ALUMINUM JAW STOCK EXTRUSION, |
| CLR25108 |
SOFT JAW ALUMINUM, W/ SMARTSTO |
| CLR2944002 |
HIGH-PRESSURE SHUT-OFF VALVE, G1/4, ND6, 500 bar |
| CLR2944003V |
MAN MOUNT SHUT OFF VALVE |
| CLR2945000 |
HIGH-PRESSURE SHUT-OFF VALVE, G1/2, ND12, 500 bar |
| CLR2951417 |
PO CHECK VLV FOR CLR-2952-417- |
| CLR2951417V |
PILOT-OPERATED CHECK VALVE |
| CLR2951420 |
PILOT-OPERATED CHECK VALVE, MANIFOLD-MOUNTING, W/ PRE-RELEASE, Max. 50 l/min, 500 bar |
| CLR2951421 |
P O CHECK VALVE FOR CLR-2951-421-V |
| CLR2952521 |
RELIEF VALVE BASIC 2922-521-V |
| CLR2952525 |
PRESSURE RELIEF VALVE G1/2, PMax. PORT R: 500 bar, ADJ. RANGE: 0 TO 500 bar |
| CLR2953112 |
Pressure reducing valve, poppet valve w/o overpressure function, pipe thread, adjustment range: 8 up to 130 bar, 500 bar |
| CLR2953115 |
Pressure reducing valve, poppet valve w/o overpressure function, screw-in valve, adjustment range: 8 up to 130 bar, 500 |
| CLR2953117 |
Pressure reducing valve, poppet valve w/o overpressure function, manifold mounting, adjustment range: 8 up to 130 bar, 5 |
| CLR2953122 |
Pressure reducing valve, poppet valve w/o overpressure function, manifold mounting or pipe thread, adjustment range: 20 |
| CLR2954419 |
SEQUENCE VALVE, MANIFOLD, ADJ. RANGE 10-75 bar |
| CLR2954420 |
SEQUENCE VALVE, ND4, ADJ. RANGE 10-150 bar, 500 bar |
| CLR2954427 |
SEQUENCE VALVE INPUT, ND4, ADJ. RANGE 10-150 bar, 500 bar |
| CLR2954427V |
SEQUENCE VALVE (INPUT VALVE) |
| CLR2954428 |
SEQUENCE VALVE SERIES, ND4, ADJ. RANGE 10-150 bar, 500 bar |
| CLR2954428V |
SEQUENCE VALVE (SERIES VALVE) |
| CLR2954429 |
SEQUENCE VALVE, ND4, ADJ. RANGE 10-150 bar, MANIFOLD, 500 bar |
| CLR2954440 |
SEQUENCE VALVE, ND4, ADJ. RANGE 100-450 bar, 500 bar |
| CLR2954441 |
SEQUENCE VALVE INPUT, ND4, ADJ. RANGE 100-450 bar, 500 bar |
| CLR2954441V |
SEQUENCE VALVE |
| CLR2954442 |
SEQUENCE VALVE INPUT, ND4, ADJ. RANGE 100-450 bar, 500 bar |
| CLR2954442V |
SEQUENCE VALVE |
| CLR2954449V |
SEQUENCE VALVE 100-450 BAR |
| CLR2956310 |
FLOW CONT VCV (5000 PSI MAX) |
| CLR2956311 |
FLOW CONTROL VALVE, ND4, DRV-06-17.1/0, VALVE BODY ZINC COATED, 350 bar |
| CLR2956410V |
FLOW CONTROL VALVE (350 BAR) |
| CLR2956411 |
FLOW CONTROL VALVE, ND6, DRV-08-17.1/0, VALVE BODY ZINC COATED, 350 bar |
| CLR2956800V |
HAWE BY-PASS CHECK VALVE |
| CLR2957209 |
FLOW CONTROL VALVE, G1/8, MAX. |
| CLR2957210 |
FLOW CONTROL VALVE, G1/4, MAX. |
| CLR3000179SW |
CLR-3000-179-SW |
| CLR3000180SW |
CLR-3000-180-SW |
| CLR3000181SW |
CLR-3000-181-SW |
| CLR3000536 |
SEAL RING, 4.7 x 9.3 mm |
| CLR3000649 |
WIPER (1074-010), 40 x 47 x 4 mm |
| CLR3000710 |
WIPER, (1073-010), 32 x 42 x 4 mm |
| CLR3000765 |
CLR-3000-765 |
| CLR3000838 |
WIPER (1072-010), 25 x 32 x 4 mm |
| CLR3001085 |
O-RING, 14.00 X 1.78 MM |
| CLR3001124SW |
O-RING (4312-5XX) |
| CLR3001147 |
O-RING 5X1.5 FKM |
| CLR3001550 |
O-RING, 5.3 X 2.4 MM |
| CLR3001551 |
O-RING, 5.85 X 2.4 MM |
| CLR3001552 |
BACK-UP RING 10 X 2.05 X 1.0 M |
| CLR3001713F |
USIT RING 4.1X7.2X1 |
| CLR3001731 |
SEALING RING FOR CONTACT BOLT, NBR, 12.42 x 1.68 mm |
| CLR3001765 |
SEALING RING FOR SWIVEL BANJO COUPL. FKM, G1/4, KDS14, 400 bar |
| CLR3001997 |
SEALING DISK ND3 FOR COUPLING |
| CLR3001998 |
SEAL DISC FOR COUPLING MECHANISM ND 8 |
| CLR3002018 |
SEALING RING FOR CONTACT BOLT, NBR - 15.6 x 1.68 mm |
| CLR3002142 |
ELASTIC SEALING FOR SCREWED PLUG, NBR, ED14 x 1.5 - G1/4, 630 bar |
| CLR3002171 |
O RING 31.47 X 1.78 MM |
| CLR3002253 |
ELASTIC SEALING FOR SCREWED PLUG, NBR, ED10 x 1 - G1/8, 630 bar |
| CLR300TB |
THREADED-BODY PUSH CLAMP SOLID |
| CLR300TBA |
CLR-300-TBA |
| CLR301F |
HYDRAULIC FITTING UNION, 37-DEGREE FLARE |
| CLR301SCA |
CLAMPING ARM ASSY |
| CLR301TB |
THREADED-BODY PUSH CLAMP TAPPE |
| CLR301TBA |
CLR-301-TBA |
| CLR301WS |
WORK SUPPORT, + 20 x 8 mm STROKE, OFF-POSITION EXTENDED, 500 bar. SIMILAR TO 1923-001 W/ 1/2 - 13 in. THREAD |
| CLR302F |
HYDRAULIC FITTING ELBOW, 37-DEGREE FLARE |
| CLR302SCA |
CLAMPING STRAP ASSY |
| CLR302TBA |
CLR-302-TBA |
| CLR302TCA |
LOCKRING FOR SMALL TC |
| CLR302V |
4-WAY HVY DUTY CLAMPING VALVE |
| CLR303F |
HYDRAULIC FITTING TEE, 37-DEGREE FLARE |
| CLR303TBA |
FEEDER CAP |
| CLR304F |
HYDRAULIC FITTING CROSS, 37-DEGREE FLARE |
| CLR304TBA |
CLR-304-TBA |
| CLR308TBA |
FEEDER CAP FOR THREADED-BODY C |
| CLR30H |
HEAVY-DUTY HOSE |
| CLR30HCC |
HEAVY DUTY HOSE COMP. ENDS 30 |
| CLR310TB |
THREADED-BODY PUSH CLAMP SWIVE |
| CLR31106 |
SOFT JAW 1018 STEEL, W/ SMARTS |
| CLR31114 |
SOFT JAW 1018 STEEL, 5 PAIRS, |
| CLR3112129 |
SPRING CLAMPING ELEMENT 50 N, W/ SEALING |
| CLR3112132 |
SPRING CLAMPING ELEMENT 100 N, W/ SEALING |
| CLR3112133 |
SPRING CLAMPING ELEMENT 200 N, W/ SEALING |
| CLR3112142 |
ASSEMBLY TOOL SDS06, WZ 6 |
| CLR3128112 |
PRECISION STEEL TUBE SEAMLESS, 8 x 1 mm |
| CLR3128113 |
PRECISION STEEL TUBE SEAMLESS, 8 x 1.5 mm |
| CLR3128212 |
PRECISION STEEL TUBE, SEAMLESS, 8 x 2 mm |
| CLR3141012 |
PLUG, DIN 43650 |
| CLR3141477 |
INTERFERENCE ILLUMINATED PLUG |
| CLR3141802 |
PLUG W/ DOUBLE LED, W/ 3 m CABLE |
| CLR3141818 |
PLUG, W/ 2.5 m CABLE, DIN 43650 |
| CLR3141991 |
CABLE SOCKET, HIRSCHMANN CA3LD |
| CLR314SC |
SWING CLAMP, S.A., CW, FLANGE |
| CLR314SCH |
SWING CLAMP |
| CLR319V |
3-WAY CLAMPING VALVE, AIR PILOT OPERATED W/O BASE. |
| CLR32361302V |
SOLENOID VLV 24VCD 2WAY 2POS N |
| CLR3300114 |
JAM NUT (3611-008) |
| CLR3300209SCA |
CAPSCREW-M5X10 (1849/1850-XX3) |
| CLR3300223F |
BOLT PLUG |
| CLR3300225TA |
SHCS, M6 x 20 mm; 8.8 |
| CLR3300271 |
SCREW, ISO EN 4762-8.8, M8 x 100 |
| CLR3300285 |
DRILL BUSHING, A 12 x 12 mm |
| CLR3300287 |
DRILL BUSHING, A 17 x 16 mm |
| CLR3300288 |
DRILL BUSHING, A 21 x 20 mm |
| CLR3300335TA |
CLR-3300-335-TA |
| CLR3300343 |
THREADED ROD M8 x 1000 mm, 8.8, |
| CLR3300357F |
AIR BLEED BOLT 121-WS |
| CLR3300412 |
FLANGE NUT, DIN 1804, M90 x 2 mm |
| CLR3300600TA |
CLR-3300-600-TA |
| CLR3300604TA |
CLR-3300-604-TA |
| CLR3300607TA |
TWIN MOUNTING PLATE |
| CLR3300609TA |
CLR-3300-609-TA |
| CLR3300613TA |
CLR-3300-613-TA |
| CLR3300615TA |
CLR-3300-615-TA |
| CLR3300625 |
SOCKET HEAD CAP SCREW, M8 X 25 |
| CLR3300699 |
FLANGE NUT, DIN 1804, M40 x 1.5 mm |
| CLR3300763 |
SCREW, ISO EN 4762-8.8, M10 x 110 |
| CLR3301107 |
SOCKET HEAD CAP SCREW, M6 x 16; 12.9 |
| CLR3301281 |
INDEX PIN, + 3 x 6 mm, |
| CLR3301461 |
THREADED PIN M3 x 4, |
| CLR3302008 |
AIR VENT FILTER, G1/8 |
| CLR3302104 |
HEXAGON NUT, M24 x 1.5 - DIN 936 |
| CLR334SC |
SWING CLAMP, S.A., CW, THRD-BO |
| CLR335V |
AIR PILOTED S/A CONTROL VALVE |
| CLR344SC |
SWING CLAMP |
| CLR345V |
HYDRAULIC PILOTED S/A CONTROL |
| CLR3467111 |
MOUNTING BODY FLANGE, 65 x 45 x 46 mm LONG, FOR 1942-XXX, 500 bar |
| CLR3468381 |
MOUNTING BODY FOR (1801-1X0), FOR COMPACT CLAMP SIZE 1, CONNECTIONS: 2 x G1/8, 1 x M5 |
| CLR3468383 |
MOUNTING BODY FOR (1803-1X0), FOR COMPACT CLAMP SIZE 3, CONNECTIONS: 2 x G1/8, 1 x M5 |
| CLR1801230C |
COMPACT CLAMP, SIZE 1, 2.5 KN, |
| CLR1802101 |
COMPACT CLAMP, SIZE 2, 4.0 KN, |
| CLR1802110 |
COMPACT CLAMP, SIZE 2, 4.0 kN, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1802111 |
Compact clamp, size 2, 4.0 kN, w/o cover, w/ short cl. lever, w/ pneum. clamping mon., 250 bar |
| CLR1802111B |
COMPACT CLAMP, SIZE 2, 4.0 KN, |
| CLR1802130 |
COMPACT CLAMP, SIZE 2, 4.0 kN, W/ COVER, W/ LONG CL. LEVER, 250 bar |
| CLR3468384 |
MOUNTING BODY FOR (1804-1X0), FOR COMPACT CLAMP SIZE 4, CONNECTIONS: 2 x G1/8, 1 x M5 |
| CLR3527049 |
NUT, M80 x 2 mm |
| CLR3527084 |
COLLAR NUT FOR (1877-X03), M85 x 2 mm |
| CLR3527092 |
NUT M14 X 1.5 FOR SWING CLAMP |
| CLR3527099 |
NUT M20 X 1.5 FOR SWING CLAMP |
| CLR3527776SCA |
FLANGE NUT (1849/1850-7X3) |
| CLR1802130B |
COMPACT CLAMP, SIZE 2, 4.0 KN, |
| CLR1802131 |
COMPACT CLAMP, SIZE 2, 4.0 kN, W/O COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1802131B |
COMPACT CLAMP, SIZE 2, 4.0 KN, |
| CLR1802210 |
COMPACT CLAMP, SIZE 2, 4.0 kN, MANIFOLD MOUNT, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1802230 |
COMPACT CLAMP, SIZE 2, 4.0 kN, MANIFOLD MOUNT, W/ COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1802230B |
COMPACT CLAMP, SIZE 2, 4.0 KN, |
| CLR3532619VA |
BLOCK FOR REDUCER CARTRIDGE |
| CLR3533001 |
BASE PLATE, COMPLETE, 320 X 22 |
| CLR3533002 |
BRACKET, COMPLETE, 150 X 110 X |
| CLR3533003 |
FLANGE, COMPLETE, 135 X 35 MM |
| CLR3534039 |
BLOCK-MOUNTING PLATE |
| CLR3534051 |
CONNECTING PLATE, G1/4, FOR PRESSURE SWITCH |
| CLR3534051PSA |
BASE ONLY FOR R-200-PS W/807-F |
| CLR35371008WSA |
ALUMINUM CAP FOR M30 WS |
| CLR35381035 |
MOUNTING BRACKET, FOR INTENSIFIER, FOR BOTH SIZES |
| CLR3538390PM |
SIGNAL BUSHING |
| CLR3540317 |
OPERATING LEVER, STEEL, FOR 2944-002 |
| CLR3540318 |
OPERATING LEVER, ALUMINIUM, FOR 2944-002, RED ANODIZED |
| CLR3546110 |
PROTECTION CAP FOR 194X-3XX, + 35/32 x 28 mm LONG |
| CLR3546111 |
PROTECTION CAP FOR 194X-4XX, + 40/37 x 30 mm LONG |
| CLR3546112 |
PROTECTION CAP FOR 194X-5XX, + 52/49 x 30 mm LONG. |
| CLR3546113 |
PROTECTION CAP FOR 194X-6XX, + 65/62 x 43 mm LONG |
| CLR35481072 |
LONG CL. LEVER(BLANK) FOR 1802-X3XX 24 x 46 x 70 mm |
| CLR35481073 |
LONG CL. LEVER(BLANK) FOR 1803-X3XX 32 x 44.5 x 77.5 mm, REPLACEMENT FOR 3548-683 |
| CLR35481074 |
LONG CL. LEVER(BLANK) FOR 1804-X3XX 35 x 47.5 x 76.5 mm |
| CLR35481121 |
SHORT CL. LEVER FOR 1801-X1XX, 19 x 31 x 37 mm |
| CLR35481123 |
SHORT CL. LEVER FOR 1803-X1XX, 32 x 42 x 46.5 mm |
| CLR3548158 |
XL ARM FOR 0354-004 |
| CLR3548588 |
LONG CLAMPING LEVER (1825-3XX) |
| CLR3548658SCA |
CLAMPING ARM W/O THREAD, 124.5 |
| CLR3548659SCA |
CLAMPING ARM W/O THREAD, 183 X |
| CLR3548660 |
CLAMPING ARM W/O THREAD, 58 x 28 x 17 mm, FOR 1843-FXXX, 350 bar |
| CLR3548661 |
CLAMPING ARM W/O THREAD, 75 x 36 x 22 mm, FOR 1844-FXXX, 350 bar |
| CLR3548803 |
CLAMPING ARM W/O THREAD, 93 x 45 x 26 mm, FOR 1845-FXXX, 350 bar |
| CLR3548804 |
CLAMPING ARM W/O THREAD, 120 x 60 x 28 mm, FOR 1846-FXXX, 350 bar |
| CLR3548901 |
CLAMPING ARM, BLANK, 16 x 32 x 125 mm LENGTH, 42CrMo4 TEMPERED |
| CLR3548902 |
CLAMPING ARM, BLANK, 23 x 48 x 190 mm LENGTH, 42CrMo4 TEMPERED |
| CLR3548904 |
CLAMPING ARM, BLANK, 34 x 78 x 298 mm LENGTH, 42CrMo4 TEMPERED |
| CLR360V |
CLR-360-V |
| CLR3610035 |
CONNECTOR, + 8 x 22 mm LONG |
| CLR3610098 |
PLUG G1/2, VSG1/2ED, 400 bar |
| CLR3610100 |
PLUG G1/2, SW 27 X 11 HIGH, 40 |
| CLR3610185F |
PLUG G 1/8 |
| CLR3610191 |
PLUG G1/4, VSG1/4ED, 400 bar |
| CLR3610263 |
PLUG G1/8, SW 14 x 7 HIGH, 500 bar |
| CLR3610265 |
PLUG G1/2, SW 27 x 11 HIGH, 500 bar |
| CLR36106 |
SOFT JAW 1018 STEEL, W/ SMARTS |
| CLR3613073 |
THREAD REDUCING ADAPTOR, G3/8, |
| CLR3614024CB |
CONTACT BOLT, CONE HEAD, M27 X |
| CLR3614025CB |
CONTACT BOLT |
| CLR3614026CB |
CONTACT BOLT |
| CLR3614073 |
SWIVEL CONTACT BOLT, FLAT FACE, M10 x 18 mm |
| CLR3614340CB |
CONTACT BOLT M10 X 22L |
| CLR3614389 |
Contact bolt, M12, for pneumatic contact control, for threaded-body work support M36 x 1.5 mm, 500 bar |
| CLR3614390 |
Contact bolt, M10, for pneumatic contact control, for threaded-body work support M30 x 1.5 mm, 500 bar |
| CLR3614394 |
CONTACT BOLT |
| CLR3619029VA |
TIE ROD, ND4, M5 X 72 MM LONG, |
| CLR36HCC |
HEAVY-DUTY HOSE |
| CLR370TC |
THREADED CYLINDER |
| CLR3815013 |
VALVE, CHECK M X E BSPP |
| CLR3815014V |
THREADED BODY CHECK VALVE |
| CLR3822008 |
OIL LEVEL CONTROL, 500, L1 = 125, TEMP. = 63ª |
| CLR3829030 |
HIGH PRESSURE PROOF SENSOR, M12 x 1, FOR STROKE END CONTROL, 500 bar |
| CLR3829049 |
M12 ANGLE PLUG, PNP, W/ 2 LED, CABLE 3 m |
| CLR3829099 |
M8 ANGLE PLUG, PNP, W/ 2 LED, CABLE 5 m |
| CLR3829106 |
M12 ANGLE PLUG, PNP, 4 POLES, 3 LED, CABLE 5 m |
| CLR3829125 |
Y-DISTRIBUTOR STRAIGHT, M12, PNP, M12 PLUG, 2 x M8 BUSHING, W/O LED, 0.3 m |
| CLR3829126PM |
VOLTAGE REGULATOR UNIT 24V |
| CLR3829132 |
HOSE CLAMP, SIZE 3 |
| CLR3829133 |
HOSE CLAMP, SIZE 4 |
| CLR3829134 |
HOSE CLAMP, SIZE 6 |
| CLR3829135 |
HOSE CLAMP, SIZE 7 |
| CLR3829228 |
HIGH-PRESSURE SENSOR, M12 X 1, FOR STROKE END CONTROL, 500 bar |
| CLR3829230 |
PLUG-TYPE CONNECTOR PNP M12, KNEE-TYPE, CODE CLASS IP67, 3 m CABLE, -40..+105ªC, NO LED |
| CLR3829257 |
RIGHT ANGLE PLUG W/ 3 LED, 10 |
| CLR3829263 |
INDUCTIVE PROXIMITY SWITCH TYPE B, COMPACT |
| CLR3829267 |
CIRCULAR CONNECTOR M12, W/O LE |
| CLR3887030 |
THREADED-BODY FILTER, STEEL GALVANIZED, 100 ªm, 500 bar |
| CLR3887066 |
HIGH PRESSURE PLUG-IN FILTER, STAINLESS STEEL, 10 ªm, 350 bar |
| CLR3887067 |
HIGH-PRESSURE FILTER, COMPACT, STAINLESS STEEL, 10 ªm, 350 bar |
| CLR3887071 |
HIGH-PRESSURE PLUG-IN FILTER, STAINLESS STEEL, 10 ªm, 350 bar |
| CLR3887086 |
HIGH-PRESSURE RECTIFIER FILTER, STAINLESS STEEL, 10 ªm, 350 bar |
| CLR3887087 |
HIGH-PRESSURE FILTER, G1/4, STAINLESS STEEL, 10 ªm, 350 bar |
| CLR3887107 |
SPARE FILTER CARTRIDGE, 500 bar |
| CLR3890064F |
REDUCING NIPPLE, G1/4 INSIDE, |
| CLR3890098 |
HOSE CONNECTION L-PIECE 90ª |
| CLR3890131 |
PLASTIC HOSE, BLACK |
| CLR40000 |
MASTER JAW SET OF TWO 4.0 IN. |
| CLR40002 |
MASTER JAW SET OF TWO 4.0 IN. |
| CLR400ASCA |
CLR-400-ASCA |
| CLR400CB |
CONTACT BOLT (RADIUS) |
| CLR400F |
HYDRAULIC FITTING TUBE END, 37-DEGREE FLARE |
| CLR400TB |
THREADED-BODY PUSH CLAMP SOLID |
| CLR400TBA |
JAM NUT FOR THREADED-BODY PUSH |
| CLR400TL |
TUBING BENDER |
| CLR400V |
SHUT OFF VALVE |
| CLR401AV |
HAND ACTUATED AIR VALVE |
| CLR401CB |
CONTACT BOLT (RADIUS) |
| CLR401F |
CLR-401-F |
| CLR401PD |
TOOLING-BLOCK PALLET DECOUPLER |
| CLR401TB |
THREADED-BODY PUSH CLAMP TAPPE |
| CLR401TBA |
JAM NUT |
| CLR402CB |
CONTACT BOLT (RADIUS) |
| CLR402F |
HYDRAULIC FITTING NUT ELBOW, 37-DEGREE FLARE |
| CLR402PD |
CLR-402-PD |
| CLR402TL |
Tubing bender, 5/16 in. |
| CLR403CB |
CONTACT BOLT (RADIUS) |
| CLR403F |
HYDRAULIC FITTING BRANCH TEE, 37-DEGREE FLARE |
| CLR404CB |
CONTACT BOLT (RADIUS) |
| CLR404F |
HYDRAULIC FITTING RUN TEE, 37-DEGREE FLARE |
| CLR405CB |
CONTACT BOLT (RADIUS) |
| CLR406CB |
CONTACT BOLT (RADIUS) |
| CLR406F |
NUT45 ELBOW 5-16 TUBE |
| CLR408CB |
CONTACT BOLT (RADIUS) |
| CLR408TBA |
CLR-408-TBA |
| CLR409CB |
CONTACT BOLT (RADIUS) |
| CLR410EC |
EDGE CLAMP |
| CLR410WS |
WORK SUPPORT |
| CLR411V |
CLR-411-V |
| CLR413CB |
CONTACT BOLT-POINTED .025 THRE |
| CLR414CB |
CONTACT BOLT (POINTED) |
| CLR415CB |
CONTACT BOLT (POINTED) |
| CLR415V |
CAM OPERATED S/A CONTROL VALVE |
| CLR416CB |
CONTACT BOLT (POINTED) |
| CLR417CB |
CONTACT BOLT (POINTED) |
| CLR420CB |
SWIVEL CONTACT BOLT(5/16-18) |
| CLR420F |
NUT & SLEEVE FOR 1 - 4 TUBE |
| CLR420V |
CLR-420-V |
| CLR4219V |
4-WAY HAND VALVE |
| CLR4220V |
4-WAY HAND VALVE W/BASE |
| CLR422CB |
SWIVEL CONTACT BOLT(1/2-13) |
| CLR422F |
NUT ELBOW 1-4 TUBE |
| CLR426F |
NUT 45 ELBOW 1-4 TUBE |
| CLR42H |
HEAVY-DUTY HOSE |
| CLR42HCC |
HEAVY DUTY HOSE COMP. ENDS 42 |
| CLR4320V |
4-WAY AIR PILOTED VALVE W/BASE |
| CLR439VA |
CLR-439-VA |
| CLR440V |
CLR-440-V |
| CLR1803110 |
COMPACT CLAMP, SIZE 3, 7.5 kN, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1803111 |
Compact clamp, size 3, 7.5 kN, w/o cover, w/ short cl. lever, w/ pneum. clamping mon., 250 bar |
| CLR1803130 |
COMPACT CLAMP, SIZE 3, 7.5 kN, W/ COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1803130B |
COMPACT CLAMP, SIZE 3, 7.5 KN, |
| CLR1803131 |
COMPACT CLAMP, SIZE 3, 6.0 kN, W/O COVER, W/ LONG CL. LEVER, 200 bar |
| CLR1803131B |
COMPACT CLAMP, SIZE 3, 7.5 KN, |
| CLR4411V |
4-WAY CONT VLV CAM OPER W/O/BA |
| CLR4439VA |
BASE FOR 4-WAY VALVES |
| CLR449V |
SEQUENCE VALVE, ND4, ADJUSTING RANGE 100 - 450 bar, MANIFOLD, 500 bar |
| CLR451V |
MAN ASSYM 2 24V DC SOLENOID VA |
| CLR454V |
MAN ASSYM D/A 24V DC SOLENOID |
| CLR455V |
MAN ASSYM 2 D/A CIRCUITS W/24 |
| CLR4606231 |
AUTOMATIC COUPLING UNIT, FOR D.A. ELEMENTS, W/ INDUCTIVE CONTROL, 500 bar |
| CLR4606231CBU |
AUTO COUP SYS-BASE W/IND. POS. |
| CLR4606235 |
COUPLING NIPPLE UNIT, FOR D.A. ELEMENTS, 500 bar |
| CLR4606235CPU |
A/C/S PALLET UNIT D/A |
| CLR461VA |
CLR-461-VA |
| CLR4629V |
4-WAY 24VDC SOLENOID VALVE |
| CLR4630V |
4-WAY 24VDC SOL VLV W/ BASE |
| CLR48H |
HEAVY DUTY HYD. HOSE 48 in. |
| CLR48HCC |
HEAVY-DUTY HOSE |
| CLR50000 |
MASTER JAW SET OF TWO 8.0 IN. |
| CLR50002 |
MASTER JAW SET OF TWO 125 MM S |
| CLR500ASCA |
LOCK RING FOR 5XX-ASC |
| CLR500PDA |
LARGE ACCUMULATOR |
| CLR500SCA |
LOCK RING 5XX-SC |
| CLR50104 |
MACHINEABLE 4.5 IN., 2 PCS, 55 |
| CLR501F |
HYDRAULIC FITTING CAP, 37-DEGREE FLARE |
| CLR501SCA |
CLR-501-SCA |
| CLR502F |
HYDRAULIC FITTING TUBE PLUG, 37-DEGREE FLARE |
| CLR502TCA |
LOCK RING FOR LARGE THREADED C |
| CLR503CB |
CONTACT BOLT 3/8 - 16 X 3 IN. |
| CLR505CB |
CONTACT BOLT 5/8 - 11 X 4 IN. |
| CLR507CB |
CONTACT BOLT 3/4 - 10 X 5 IN. |
| CLR508TBA |
CLR-508-TBA |
| CLR514SC |
SWING CLAMP, S.A., CW, FLANGE |
| CLR524SC |
SWING CLAMP, S.A., CCW, FLANGE |
| CLR534SCD |
SWING CLAMP |
| CLR534SCH |
SWING CLAMP |
| CLR540V |
FLOW CONTROL VALVE M BOTH ENDS |
| CLR541V |
FLOW CONTROL VALVE |
| CLR542V |
PILOT-OPERATED CHECK VALVE |
| CLR544SCD |
SWING CLAMP |
| CLR544SCH |
SWING CLAMP |
| CLR5700010 |
Mounting Sleeve for CLR-1073-010 |
| CLR570TC |
THREADED CYLINDER |
| CLR60002 |
MASTER JAW SET OF TWO 6.3 IN. |
| CLR60006 |
TALON TOP 1018 DOVETAILED, 6.0 |
| CLR600ASCA |
LOCK RING FOR 6XX-ASC |
| CLR600VA |
CLR-600-VA |
| CLR601SCA |
HALF ARM (6XX) |
| CLR601V |
CLR-601-V |
| CLR602V |
CLR-602-V |
| CLR60H |
HEAVY-DUTY HOSE |
| CLR60HCC |
HEAVY DUTY HOSE COMP. ENDS 60 |
| CLR629V |
SOLENOID VALVE W/O BASE (GZ3-1R) |
| CLR6355108 |
FLOW CONTROL VALVE |
| CLR6355679V |
THREADED-BODY CHECK VALVE |
| CLR645V |
SOLENOID 24 VDC S/A CONTROL VA |
| CLR650VA |
CLR-650-VA |
| CLR6821622 |
POWER UNIT, FOR D.A. ELEMENTS, 500 bar |
| CLR691VA |
SERIES BLOCK |
| CLR700ASCA |
CLR-700-ASCA |
| CLR700WS |
WORK SUPPORT LARGE BASE SPRING |
| CLR701F |
HYDRAULIC FITTING UNION, COMPRESSION TYPE |
| CLR701SCA |
CLR-701-SCA |
| CLR702F |
HYDRAULIC FITTING ELBOW, COMPRESSION TYPE |
| CLR703F |
HYDRAULIC FITTING TEE, COMPRESSION TYPE |
| CLR704F |
HYDRAULIC FITTING CROSS, COMPRESSION TYPE |
| CLR705F |
HYDRAULIC FITTING #4 SAE PORT FITTING, 37-DEGREE FLARE (5000 PSI MAX) |
| CLR706F |
HYDRAULIC FITTING #4 SAE TO #6 SAE REDUCING ADAPTOR (5000 PSI MAX) |
| CLR711WSA |
CLR-711-WSA |
| CLR712WSA |
CLR-712-WSA |
| CLR714SC |
SWING CLAMP, S.A., CW, FLANGE |
| CLR714SCDH |
SWING CLAMP |
| CLR71681257 |
ADJUSTING SLEEVE, CLAMPING RAN |
| CLR71681258 |
ADJUSTING SLEEVE, CLAMPING RAN |
| CLR71681259 |
ADJUSTING SLEEVE, CLAMPING RAN |
| CLR71681260 |
ADJUSTING SLEEVE, CLAMPING RAN |
| CLR722F |
ELBOW 1-4 TUBE |
| CLR723F |
TEE 1-4 TUBE |
| CLR724SC |
SWING CLAMP, S.A., CCW, FLANGE |
| CLR724SCDH |
SWING CLAMP |
| CLR72H |
HEAVY DUTY HYD. HOSE 72 in. |
| CLR7990523V |
CONTROL VALVE 4/3 WAY 24 VDC 3 |
| CLR7990568EXA |
MOUNTING BLK FOR 1825-01X |
| CLR80001 |
LOW HEAD CAP SCREW, 1/2-13 |
| CLR80002 |
LOW HEAD CAP SCREW, M12 |
| CLR80003 |
RH/LH DIFFERENTIAL SCREW, 5/16 |
| CLR80004 |
SMARTSTOP, 1/4 X 3/8 IN., 100 |
| CLR80005 |
CARVESMART 5/16-24 CLAMP ASSEM |
| CLR800F |
HYDRAULIC FITTING PORT FITTING COMPRESSION TYPE, REPLACEMENT NUT |
| CLR801F |
HYDRAULIC FITTING PORT FITTING COMPRESSION TYPE, REPLACEMENT SLEEVE |
| CLR801TB |
THREADED-BODY PUSH CLAMP SOLID PLUNGER |
| CLR802F |
HYDRAULIC FITTING PORT FITTING COMPRESSION TYPE |
| CLR802TB |
THREADED-BODY PUSH CLAMP SOLID PLUNGER |
| CLR802V |
ROTARY VALVE COUPLING, ND 5, 8 |
| CLR803F |
SWIVEL BANJO COUPLING, PIPE + 8 mm, G1/4, SVH8SR/SA, 400 bar |
| CLR804F |
T-SWIVEL COUPLING, PIPE 8 MM |
| CLR805F |
MALE COUPLING 1-8 BSPP TO 8MM |
| CLR806AF |
G1/8 PUSH LOC AIR FITTING |
| CLR806F |
PORT FITTING 1/4 BSPP X 1/4 COMP |
| CLR807F |
HYDRAULIC FITTING PORT FITTING, 37-DEGREE FLARE |
| CLR808F |
HYDRAULIC FITTING FEMALE GAUGE |
| CLR809F |
HYDRAULIC FITTING DOUBLE PORT FITTING |
| CLR810F |
HYDRAULIC FITTING PORT PLUG |
| CLR813F |
HYDRAULIC FITTING PORT FITTING, 37-DEGREE FLARE FEMALE |
| CLR814F |
HYDRAULIC FITTING BANJO ELBOW, |
| CLR1803210 |
COMPACT CLAMP, SIZE 3, 7.5 kN, MANIFOLD MOUNT, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1803230 |
COMPACT CLAMP, SIZE 3, 7.5 kN, MANIFOLD MOUNT, W/ COVER, W/ LONG CL. LEVER, 250 bar |
| CLR1804100EXD |
COMPACT CLAMP SIZE FOUR W/COVE |
| CLR1804110 |
COMPACT CLAMP, SIZE 4, 10.5 kN, W/ COVER, W/ SHORT CL. LEVER, 250 bar |
| CLR1804111 |
Compact clamp, size 4, 10.5 kN, w/o cover, w/ short cl. lever, w/ pneum. clamping mon., 250 bar |
| CLR901F |
HYDRAULIC FITTING CONNECTING INSERT(LONG) FOR CONNECTIONS WITH A GAP |
| CLR902F |
CLR-902-F |
| CLR903F |
HYDRAULIC FITTING 1/8 BSPP POR |
| CLR906F |
HYDRAULIC FITTING EXPANDING PLUG |
| CLR916F |
EXPANDING PLUG 6MM |
| CLR9206003 |
TUBE MALE STUD COUPLING, PIPE + 6 MM, G1/8, D6L, 250 BAR |
| CLR9206009 |
T-SWIVEL COUPLING, M12 X 1.5, Q6L, 250 BAR |
| CLR9206019 |
T-SWIVEL COUPLING, G1/8, DSVQ6LRO, W/O THROTTLING, 250 BAR |
| CLR9206028 |
TUBE MALE STUD COUPLING, PIPE + 6 MM, G1/8, D6L ED, 250 BAR |
| CLR9208039 |
BLANKING PLUG, PIPE + 8 MM, VB8S, 630 BAR |
| CLR9208042 |
PRESSURE GAGE UNION, TYPE B, G1/4, 250 BAR |
| CLR9208069 |
SINGLE PASSAGE ROTARY COUPLING, G1/4, A-8SR |
| CLR9208111 |
CHECK VALVE POPPET TYPE, M16 X 1.5, RWD8S, 400 BAR |
| CLR9208175 |
T-SWIVEL COUPLING, G1/4, DSVQ8 |
| CLR9208176 |
1-PASS ROTARY CPLG FOR CLR-843-F |
| CLR9208181 |
FLOW-CONTROL SWIVEL BANJO COUPLING, PIPE + 8 mm, G1/4, VERSION A, 500 bar |
| CLR9208182 |
FLOW-CONTROL SWIVEL BANJO COUP |
| CLR9210132 |
CONNECTING INSERT, VITON, ND 5, + 10 X 14 MM, ELASTIC |
| CLR9210145 |
PLUG-TYPE CONNECTOR, ND 3, + 8 X 12 MM |
| CLR815AF |
AIR VENT FITTING |
| CLR815F |
PORT FITTING FEMALE 1-4 TUBE |
| CLR816F |
HYDRAULIC FITTING PORT FITTING, 1/4" TUBING 37-DEGREE FLARE |
| CLR817AF |
MOD R810F, 90 VENT PLUG |
| CLR821F |
FERRULE 1-4 TUBE |
| CLR823F |
BANJO ELBOW 1/4 BSPP TO 1/4 COMP FITTING |
| CLR824F |
BRANCH TEE 1/4 BSPP TO 1/4 COMP FITTING |
| CLR826F |
FITTING 1-4 COMP X 1-8 BSPP |
| CLR843F |
ROTARY COUPLING SINGLR PASSAGE |
| CLR845F |
ROTARY COUPLING SINGLE PASSAGE |
| CLR8600111 |
HYDRO-PNEUMATIC PUMP, W/ PNEUMATIC VALVE, Max. FLOW RATE 1.5 l/min, 500 bar |
| CLR8601211 |
HYDRO-PNEUMATIC PUMP, FOR S.A. CYLINDER, FOOT OPERATED, Max. FLOW RATE 0.85 l/min, 500 bar |
| CLR8755120 |
INTENSIFIER, PIPE THREAD, SIZE 1, INTENSIFICATION I=2, 8.0/1.5 l/min, Max. 200 bar, 400 bar |
| CLR8755128 |
INTENSIFIER, PIPE THREAD, SIZE 1, INTENSIFICATION I=2.8, 8.0/1.5 l/min, Max. 178 bar, 500 bar |
| CLR8755515 |
INTENSIFIER, D.A., INTENSIFICATION I=1.5, 8.0/2.6 l/min, Max. 200 bar, 300 bar |
| CLR8755520 |
INTENSIFIER, D.A., INTENSIFICATION I=2.0, 12/2.4 l/min, Max. 200 bar, 400 bar |
| CLR8755532 |
INTENSIFIER, D.A., INTENSIFICATION I=3.2, 15/1.6 l/min, Max. 155 bar, 500 bar |
| CLR8755540 |
INTENSIFIER, D.A., INTENSIFICATION I=4.0, 14/1.3 l/min, Max. 125 bar, 500 bar |
| CLR8755550 |
INTENSIFIER, D.A., INTENSIFICATION I=5.0, 14/1.0 l/min, Max. 100 bar, 500 bar |
| CLR8755615 |
INTENSIFIER, MANIFOLD-MOUNTING, INTENSIFICATION I=1.5, 8.0/2.6 l/min, Max. 200 bar, 300 bar |
| CLR8755620 |
INTENSIFIER, MANIFOLD-MOUNTING, INTENSIFICATION I=2.0, 12/2.4 l/min, Max. 200 bar, 400 bar |
| CLR8755632 |
INTENSIFIER, MANIFOLD-MOUNTING, INTENSIFICATION I=3.2, 15/1.6 l/min, Max. 156 bar, 500 bar |
| CLR8755640 |
INTENSIFIER, MANIFOLD-MOUNTING, INTENSIFICATION I=4.0, 14/1.3 l/min, Max. 125 bar, 500 bar |
| CLR8755650 |
INTENSIFIER, MANIFOLD-MOUNTING, INTENSIFICATION I=5.0, 14/1.0 l/min, Max. 100 bar, 500 bar |
| CLR8755666 |
INTENSIFIER, MANIFOLD-MOUNTING, INTENSIFICATION I=6.6, 13/0.4 l/min, Max. 75 bar, 500 bar |
| CLR8755715 |
Intensifier, D.A., intensification ratio 1.5, w/ pilot-operated check valve, pipe thread and manifold-mounting connectio |
| CLR8755720 |
Intensifier, D.A., intensification ratio 2.0, w/ pilot-operated check valve, pipe thread and manifold-mounting connectio |
| CLR8755732 |
Intensifier, D.A., intensification ratio 3.2, w/ pilot-operated check valve, pipe thread and manifold-mounting connectio |
| CLR8755740 |
Intensifier, D.A., intensification ratio 4.0, w/ pilot-operated check valve, pipe thread and manifold-mounting connectio |
| CLR8755750 |
Intensifier, D.A., intensification ratio 5.0, w/ pilot-operated check valve, pipe thread and manifold-mounting connectio |
| CLR8816026 |
HYDRAULIC PUMP, OIL VOLUME 300/150 cmª, W/ SAFETY HAND LEVER, 500 bar |
| CLR9370601000 |
HYDRAULIC HIGH-RESSURE HOSE, ND6 X 1000 MM LONG - M8S, 500 BAR |
| CLR9375200500 |
HYDRAULIC HIGH-RESSURE HOSE, ND4 X 500 MM LONG - M8S, W/ WIRE BRAIDING, 500 BAR |
| CLR9375201000 |
HYDRAULIC HIGH-RESSURE HOSE, ND4 X 1000 MM LONG - M8S, W/ WIRE BRAIDING, 500 BAR |
| CLR9375202000 |
BRAIDED FIXTURE HOSE, 500 BAR, |
| CLR9384624 |
COUPLING NIPPLE, W/ DVV 6 BAR (SPARE PART) |
| CLR9384710F |
QUICK DISCONNECT PUSH/PULL CO |
| CLR9384730F |
QUICK DISC PUSH/PULL CODE RED |
| CLR9384731F |
QUICK DISCONNECT |
| CLR9384732 |
FITTING FOR CODED COUPLING, RE |
| CLR9384740F |
QUICK DISC PUSH/PULL CODE YELL |
| CLR9384750F |
QUICK DISCONNECT PUSH/PULL CO |
| CLR9384760F |
QUICK DISCONNECT PUSH/PULL COD |
| CLR9425102PDA |
FEMALE DISCONNECT DOUBLE COUPL |
| CLR942F |
HYDRAULIC FITTING #4 SAE PORT FITTING, COMPRESSION TYPE (5000 PSI MAX) |
| CLR9604310 |
HYDRAULIC ACCUMULATOR 750 CM?, GAS-PRELOAD PRESSURE40 BAR, G1/2 INTERNAL THREAD, 250 BAR |
| CLR9605611 |
Hydraulic accumulator 75 cmª, gas-preload 100 bar, G1/4 internal thread, 500 bar |
| CLR9606102 |
HYDRAULIC ACCUMULATOR 13 CM, |
| CLR9606102PDA |
HYDRAULIC ACCUMULATOR 13 CM, |
| CLR9606109 |
HYDRAULIC ACCUMULATOR, 13 CM, |
| CLR9606401 |
HYDRAULIC ACCUMULATOR, 40 CM, |
| CLR9730500PS |
PRESSURE SWITCH 50-500 BAR |
| CLR9730501 |
PRESSURE SWITCH ONLY, 50-350 BAR, ELECTRO-HYDRAULIC, 600 BAR |
| CLR9730501PS |
PRESSURE SWITCH 50-350 BAR |
| CLR9730502PS |
PRESSURE SWITCH 5-180 BAR |
| CLR9740026CC |
CONTROL CYLINDER |
| CLR9740027CC |
CONTROL CYLINDER |
| CLR9740802CC |
CONTROL CYLINDER |
| CLR9740803CC |
CONTROL CYLINDER, S/F (MEDIUM) |
| CLR9822000 |
PRESSURE GAUGE W/ CUSHIONING, G1/4, 250 BAR |
| CLR9823000 |
PRESSURE GAUGE W/ CUSHIONING, G1/4, 400 BAR |
| CLR9823005 |
PRESSURE GAUGE W/ CUSHIONING, G1/4A, 400 BAR |
| CLRDZ12889598 |
DropZero modular zero-point device, manual, stackable, + 88.90 x 59.80 mm, retention force 12 kN at 2.5 rotations. |
| CLRDZ12889598H |
DropZero housing, w/o metec 1, + 88.90 x 59.80 mm |
| CLRDZ12D15 |
DROPZERO LOCATING DOWEL 20MM |
| CLRDZ12K6S |
CLR-DZ12K-6S Standard Pull Stud Kit, for use with Carr Lane Modular Tooling. Includes 6 Drop Zero's (CLR-DZ12-889-598), |
| CLRDZ12M25 |
CLAMPING SPINDLE SPEEDY METEC |
| CLRDZ12N20D |
Diamond point pull stud |
| CLRDZ12N20F |
FLOATING PULL STUD |
| CLRDZ12N20Z |
Zero point pull stud |
| CLRH169110002 |
Allen wrench SW6 |
| CLR922F |
PORT FITTING 5/16 COMP. #2 SAE M |
| CLR926F |
EXPANDING PLUG 10MM |
| CLR9281135 |
ROTARY COUPLING ND5, TWIN PASSAGE, 500 BAR |
| CLR9282105 |
ROTARY COUPLING, 2 PASSAGE ND 5, PIPE THREAD, PORT SIZE G1/4, BALL-BEARING, 500 bar |
| CLR9284036 |
ROTARY COUPLING ND5, FOUR PASSAGE, 500 BAR (REPLACEMENT FOR 9284-005, -006 AND -705) |
| CLR9284135 |
ROTARY COUPLING ND5, FOUR PASSAGE, W/ LEAKAGE RE-CIRCULATION PORT, 500 bar (REPLACEMENT FOR 9284-105 AND -106) |
| CLR9284205 |
ROTARY COUPLING, 4 PASSAGE ND 5, PIPE THREAD, PORT SIZE G1/4, BALL-BEARING, 500 bar |
| CLR9284305 |
ROTARY COUPLING, 4 PASSAGE ND 5, PORT SIZE G1/4, BALL-BEARINGS, MANIFOLD MOUNT, W/ LEAKAGE RE-CIRCULATION, 500 bar |
| CLR9286135 |
ROTARY COUPLING ND5, SIX PASSAGE, 500 BAR |
| CLR9286205 |
ROTARY COUPLING, 6 PASSAGE ND 5, LEAKAGE OIL DRAIN LINE, BALL-BEARINGS, PIPE THREAD, 500 bar |
| CLR9295001V |
ROTARY VALVE COUPLING, ND5, 5 |
| CLR9295002V |
ROTARY VALVE COUPLING, ND5, 5 |
| CLRH328404VSA |
STEP JAW INSERT FOR JAW WIDTH 160 mm, FOR FIXED JAW |
| CLRH328413VSA |
STEP JAW INSERT FOR JAW WIDTH |
| CLRH930820203 |
Machine vise NC 100 H, hyd./hyd., w/ high-pressure unit, jaw width 100 mm, clamping width Max. 207 mm, cl. force Max. 25 |
| CLRH930830203 |
Machine vise NC 125 H, hyd./hyd., w/ high-pressure unit, jaw width 125 mm, clamping width Max. 225 mm, cl. force Max. 40 |
| CLRH930830203VS |
NC 125 VISE, HYD./HYD.W/ SET O |
| CLRH930840203 |
Machine vise NC 160 H, hyd./hyd., w/ high-pressure unit, jaw width 160 mm, clamping width Max. 310 mm, cl. force Max. 63 |
| CLRH930720203 |
Machine vise NC 100 mm, hyd./mech., w/ high-pressure unit, jaw width 100 mm, clamping width Max. 207 mm, cl. force Max. |
| CLRH930720213 |
MACHINE VISE NC 100 M, W/ KN G |
| CLRH930720213VS |
NC 100 VISE, W/ KN GAUGE, HYD/ |
| CLRH930720215 |
NC 100 VISE, W/ LB GAUGE, HYD/ |
| CLRH930720215VS |
NC 100 VISE W/ LB GAUGE, HYD./ |
| CLRH930730203 |
Machine vise NC 125 mm, hyd./mech., w/ high-pressure unit, jaw width 125 mm, clamping width Max. 225 mm, cl. force Max. |
| CLRH930840203VS |
NC 160 VISE, HYD./HYD.W/ SET O |
| CLRH932856008 |
JAW INSERT FOR FIXED JAW AND S |
| CLRH932940505 |
Right angle drive (100 mm) |
| CLRH932940705 |
Right angle drive (160 mm) |
| CLRH935730111 |
PALLET CLAMP PC 80 F, 20 kN/60 Nm, 80 mm JAW WIDTH,5 - 119 mm CLAMPING WIDTH, 4 x 4 mm CLAMPING STEP |
| CLRH935730311 |
PALLET CLAMP PC80Z 20kN/60Nm 15-139MM CLAMPING WIDTH |
| CLRH935830301VS |
MINICLAMP MC 60Z MANUAL |
| CLRH936730121VS |
SCS 120 M W/HOLES FOR QUINTUS |
| CLRH937772031 |
Set of 4 clamp claws 12 mm lip, M10 thread |
| CLRH937773211VSA |
KEYBLOCK SET FOR T-SLOT (14 MM |
| CLRH937926600 |
Torque wrench, 5 - 60 Nm, torque wrench with range 5 - 60 Nm. For use in adjusting Hilma high pressure spindles. |
| CLRH939200102VSA |
POSITIONING PIN |
| CLRH939200201VSA |
PULL-DOWN BOLT FOR QUINTUS 1 |
| CLRH939200202VSA |
PULL-DOWN BOLTS FOR QUINTUS 2, SET OF TWO (1) ZERO-POINT CENTERING, (1) SINGLE-AXIS CENTERING |
| CLRH939200203VSA |
PULL-DOWN BOLTS FOR QUINTUS 3, SET OF THREE (1) ZERO-POINT CENTERING, (1) SINGLE-AXIS CENTERING, (1) NON-CENTERING |
| CLRH945830101 |
Clamping system MC-P 60, fixed jaw clamping, w/o jaws, base length 170 mm, jaw width 60 mm, cl. force 15 kN, cl. stroke |
| CLRH945830301 |
Clamping system MC-P 60 Z, concentric clamping, w/o jaws, length 170 mm, width 60 mm, cl. force 15 kN. |
| CLRH945830401 |
Workholding system, MC-P 60 ZH, hydraulic, two-circuit version, concentrically clamping w/o jaws, jaw width 60 mm, Max. |
| CLRH945830701 |
Clamping system MC-P 60 ZB, concentric position flexible clamping, w/o jaws, base length 170 mm, jaw width 60 mm, cl. fo |
| CLRH945836901 |
STEP JAW FOR MC-P 60, LOWER DE |
| CLRH945836902 |
STEP JAW FOR MC-P 60, HARDENED |
| CLRH945836903 |
STEP JAW FOR MC-P 60, HARDENED |
| CLRH945836921 |
VEE JAW FOR MC-P 60, HARDENED, |
| CLRH945836931 |
STEP JAW FOR MC-P 60, HARDENED |
| CLRH945836932 |
BLOCK JAW FOR MC-P 60, SOFT, F |
| CLRH945850101 |
Clamping system MC-P 100, fixed jaw clamping, w/o jaws, base length 260 mm, jaw width 100 mm, cl. force 25 kN, cl. strok |
| CLRH945850301 |
Clamping system MC-P 100 Z, concentric clamping, w/o jaws, base length 260 mm, jaw width 100 mm, cl. force 25 kN, cl. st |
| CLRH945850401 |
Workholding system, MC-P 100 ZH, hydraulic, two-circuit version, concentrically clamping w/o jaws, jaw width 100 mm, Max |
| CLRH945850701 |
Clamping system MC-P 100 ZB, concentric position flexible clamping, w/o jaws, base length 260 mm, jaw width 100 mm, cl. |
| CLRH945856901 |
STEP JAW FOR MC-P 100, LOWER D |
| CLRH945856902 |
STEP JAW FOR MC-P 100, HARDENE |
| CLRH945856903 |
STEP JAW FOR MC-P 100, HARDENE |
| CLRH945856904 |
STEP JAW FOR MC-P 100, HARDENE |
| CLRH945856921 |
VEE JAW FOR MC-P 100, HARDENED |
| CLRH945856931 |
STEP JAW FOR MC-P 100, HARDENE |
| CLRH945856932 |
BLOCK JAW FOR MC-P 100, SOFT, |
| CLRH945860101 |
Clamping system MC-P 125, fixed jaw clamping, w/o jaws, base length 283 mm, jaw width 125 mm, cl. force 35 kN, cl. strok |
| CLRH945860301 |
Clamping system MC-P 125 Z, concentric clamping, w/o jaws, base length 465 mm, jaw width 125 mm, cl. force 35 kN, cl. st |
| CLRH945860401 |
WORKHOLDING SYSTEM, MC-P 125 Z |
| CLRH945860601 |
Clamping system MC-P 125 Z Compact, concentric clamping, w/o jaws, base length 283 mm, jaw width 125 mm, cl. force 35 kN |
| CLRH945866901 |
STEP JAW FOR MC-P 125, LOWER D |
| CLRH945866902 |
STEP JAW FOR MC-P 125, HARDENE |
| CLRH945866931 |
STEP JAW FOR MC-P 125, HARDENE |
| CLRH945866932 |
BLOCK JAW FOR MC-P 125, SOFT, |
| CLRH946720101 |
WORKHOLDING SYSTEM, SCS 80 COM |
| CLRH946736943 |
CLRH-9-4673-6943 Special grip jaw for SCS 120, jaw width 120/120 mm, Replacement for 9-3973-1103 |
| CLRH961530101VSA |
QUINTUS 60 1X10 KN MECHANICAL |
| CLRH961535001VSA |
CENTERING PIN D30 G6 |
| CLRH961535002VSA |
CENTERING PIN D32 G6 |
| CLRH961535003VSA |
CENTERING PIN D50 G6 |
| CLRH961535004VSA |
KEY BLOCK DIN 6322, 14MM |
| CLRH961535005VSA |
Set of t-keyblocks DIN 508, 14 mm |
| CLRH961535009VSA |
CENTERING BOLT D50 G6 |
| CLRH961550102VSA |
QUINTUS 2, 2 X 20 KN |
| CLRH961560102VSA |
RAPID CHANGE BLOCK QUINTUS 125 MECHANICALLY OPERATED |
| CLRHH1560065J5J |
FIXTURE HOSE 5/32" ID X 6" |
| CLRHH1560075J5J |
CLR-HH-156-007-5J5J |
| CLRHH1560085J5J |
CLR-HH-156-008-5J5J |
| CLRHH1560095J5J |
FIXTURE HOSE 5/32' ID X9" |
| CLRHH1560105J5J |
FIXTURE HOSE 5/32" ID X 10" |
| CLRHH1560115J5J |
CLR-HH-156-011-5J5J |
| CLRHH1560125J5J |
FIXTURE HOSE 5/32" ID X 12" |
| CLRHH1560125J5JA |
FIXTURE HOSE 5/32 in. I.D. x 12 in. W/ STAINLESS STEEL ARMOR CASING |
| CLRHH1560135J5J |
CLR-HH-156-013-5J5J |
| CLRHH1560145J5J |
FIXTURE HOSE 5/32" ID X 14" |
| CLRHH1560145J5JA |
FIXTURE HOSE 5/32" ID X 14" W/ |
| CLRHH1560155J5J |
FIXTURE HOSE 5/32" ID X 15" |
| CLRHH1560155J5JA |
FIXTURE HOSE 5/32 IN. I.D. X 1 |
| CLRHH1560165J5J |
FIXTURE HOSE 5/32" ID X 16" |
| CLRHH1560165J5JA |
FIXTURE HOSE 5/32" ID X 16" W/STAINLESS STEEL ARMOR CASING |
| CLRHH1560175J5J |
CLR-HH-156-017-5J5J |
| CLRHH1560185J5J |
FIXTURE HOSE 5/32" ID X 18" |
| CLRHH1560185J5JA |
fixture hose 5/32 in. i.d. x 18 in. w/ stainless steel armor casing |
| CLRHH1560195J5JA |
FIXTURE HOSE 5/32 IN. I.D. X 2 |
| CLRHH1560205J5J |
FIXTURE HOSE 5/32" ID X 20" |
| CLRHH1560205J5JA |
FIXTURE HOSE 5/32" ID X 20" W/STAINLESS STEEL ARMOR CASING |
| CLRHH1560215J5J |
CLR-HH-156-021-5J5J |
| CLRHH1560225J5J |
CLR-HH-156-022-5J5J |
| CLRHH1560225J5JA |
fixture hose 5/32" ID x 22" w/stainless steel armor casing |
| CLRHH1560235J5J |
CLR-HH-156-023-5J5J |
| CLRHH1560235J5JA |
CLR-HH-156-023-5J5JA |
| CLRHH1560245J5J |
FIXTURE HOSE 5/32" ID X 24" |
| CLRHH1560245J5JA |
FIXTURE HOSE 5/32 IN. I.D. X 2 |
| CLRHH1560255J5J |
CLR-HH-156-025-5J5J |
| CLRHH1560255J5JA |
FIXTURE HOSE 5/32 IN. I.D. X 2 |
| CLRHH1560265J5JA |
FIXTURE HOSE 5/32 IN. I.D. X 2 |
| CLRHH1560275J5J |
CLR-HH-156-027-5J5J |
| CLRHH1560275J5JA |
FIXTURE HOSE 5/32" ID X 27" W/ |
| CLRHH1560285J5JA |
fixture hose 5/32" ID x 28" w/stainless steel armor casing |
| CLRHH1560295J5J |
CLR-HH-156-029-5J5J |
| CLRHH1560315J5J |
CLR-HH-156-031-5J5J |
| CLRHH1560325J5J |
FIXTURE HOSE 5/32" ID X 32" |
| CLRHH1560335J5J |
CLR-HH-156-033-5J5J |
| CLRHH1560345J5J |
CLR-HH-156-034-5J5J |
| CLRHH1560365J5J |
FIXTURE HOSE 5/32" ID X 36" |
| CLRHH1560375J5J |
CLR-HH-156-037-5J5J |
| CLRHH1560385J5J |
CLR-HH-156-038-5J5J |
| CLRHH1560405J5J |
CLR-HH-156-040-5J5J |
| CLRHH1560415J5J |
CLR-HH-156-041-5J5J |
| CLRHH1560425J5J |
CLR-HH-156-042-5J5J |
| CLRHH1560435J5J |
CLR-HH-156-043-5J5J |
| CLRHH1560445J5J |
CLR-HH-156-044-5J5J |
| CLRHH1560455J5J |
CLR-HH-156-045-5J5J |
| CLRHH1560465J5J |
CLR-HH-156-046-5J5J |
| CLRHH1560475J5J |
CLR-HH-156-047-5J5J |
| CLRHH1560485J5J |
CLR-HH-156-048-5J5J |
| CLRHH1560495J5J |
CLR-HH-156-049-5J5J |
| CLRHH1560515J5J |
CLR-HH-156-051-5J5J |
| CLRHH1560525J5J |
CLR-HH-156-052-5J5J |
| CLRHH1560535J5J |
CLR-HH-156-053-5J5J |
| CLRHH1560545J5J |
CLR-HH-156-054-5J5J |
| CLRHH1560555J5J |
CLR-HH-156-055-5J5J |
| CLRHH1560565J5J |
CLR-HH-156-056-5J5J |
| CLRHH1560575J5J |
CLR-HH-156-057-5J5J |
| CLRHH1560585J5J |
CLR-HH-156-058-5J5J |
| CLRHH1560605J5J |
CLR-HH-156-060-5J5J |
| CLRHH1560625J5J |
CLR-HH-156-062-5J5J |
| CLRHH1560635J5J |
CLR-HH-156-063-5J5J |
| CLRHH1560645J5J |
CLR-HH-156-064-5J5J |
| CLRHH1560655J5J |
CLR-HH-156-065-5J5J |
| CLRHH1560665J5J |
CLR-HH-156-066-5J5J |
| CLRHH1560675J5J |
CLR-HH-156-067-5J5J |
| CLRHH1560695J5J |
CLR-HH-156-069-5J5J |
| CLRHH1560705J5J |
CLR-HH-156-070-5J5J |
| CLRHH1560725J5J |
FIXTURE HOSE 5/32" ID X 72 |
| CLRHH1560745J5J |
CLR-HH-156-074-5J5J |
| CLRHH1560755J5J |
CLR-HH-156-075-5J5J |
| CLRHH1560785J5J |
CLR-HH-156-078-5J5J |
| CLRHH1560795J5J |
CLR-HH-156-079-5J5J |
| CLRHH1560825J5J |
CLR-HH-156-082-5J5J |
| CLRHH1560845J5J |
CLR-HH-156-084-5J5J |
| CLRHH1560865J5J |
CLR-HH-156-086-5J5J |
| CLRHH1560885J5J |
CLR-HH-156-088-5J5J |
| CLRHH1560965J5J |
CLR-HH-156-096-5J5J |
| CLRHH1560985J5J |
CLR-HH-156-098-5J5J |
| CLRHH1561025J5J |
CLR-HH-156-102-5J5J |
| CLRHH1561065J5J |
CLR-HH-156-106-5J5J |
| CLRHH1561085J5J |
CLR-HH-156-108-5J5J |
| CLRHH1561125J5J |
CLR-HH-156-112-5J5J |
| CLRHH1561205J5J |
FIXTURE HOSE 5/32" ID X 120" |
| CLRHH1561255J5J |
CLR-HH-156-125-5J5J |
| CLRHH1561295J5J |
CLR-HH-156-129-5J5J |
| CLRHH1561325J5J |
CLR-HH-156-132-5J5J |
| CLRHH1561405J5J |
CLR-HH-156-140-5J5J |
| CLRHH1561565J5J |
CLR-HH-156-156-5J5J |
| CLRHH1561685J5J |
CLR-HH-156-168-5J5J |
| CLRHH1561755J5J |
CLR-HH-156-175-5J5J |
| CLRHH1561805J5J |
CLR-HH-156-180-5J5J |
| CLRHH1561925J5J |
CLR-HH-156-192-5J5J |
| CLRHH1562045J5J |
CLR-HH-156-204-5J5J |
| CLRH930730213 |
MACHINE VISE NC 125 M, W/ KN G |
| CLRH930730213VS |
NC 125 VISE, W/ KN GAUGE, HYD/ |
| CLRH930730215 |
NC 125 VISE, W/ LB GAUGE, HYD/ |
| CLRH930730215VS |
NC 125 VISE W/ LB GAUGE, HYD./ |
| CLRH930740203 |
Machine vise NC 160 mm, hyd./mech., w/ high pressure unit, jaw width 160 mm, clamping width Max. 310 mm, cl. force Max. |
| CLRH930740203VS |
NC 160 VISE, HYD./MECH.,W/ SET |
| CLRH930740213 |
MACHINE VISE NC 160 M, W/ KN G |
| CLRH930740213VS |
NC 160 VISE W/ KN GAUGE, HYD./ |
| CLRH930740215 |
NC 160 VISE, W/ LB GAUGE, HYD/ |
| CLRH930740215VS |
NC 160 VISE W/ LB GAUGE, HYD./ |
| CLRRM602514 |
RM MINI SLIDE, D.A., VITON, + 50/32 mm, STROKE 25 mm, 2 LIMIT SWITCHES ON THE RIGHT SIDE, 500 bar |
| CLRRM602515 |
RM MINI SLIDE, D.A., VITON, + 50/32 mm, STROKE 25 mm, 1 INDUCTIVE SENSOR ON THE LEFT SIDE, 500 bar |
| CLRRM605012B |
RM MINI SLIDE, D.A., VITON, + 50/32 mm, STROKE 50 mm, 2 INDUCTIVE SENSORS ON THE RIGHT SIDE, O-RING, 500 bar |
| CLRRM605016B |
RM MINI SLIDE, D.A., VITON, + 50/32 mm, STROKE 50 mm, 2 INDUCTIVE SENSORS ON THE LEFT SIDE, O-RING, 500 bar |
| CLRRSS30504012LSC |
HYD SLIDE 25 MM PISTON 50 MM S |
| CLRRSS30504112LSC |
HYDRAULIC SLIDE, 25 MM PISTON, |
| CLRRSS40502010LSC |
HYD SLIDE 32MM PISTON 50MM STR |
| CLRRSS50502010LSC |
HYD SLIDE 40MM 50MM STK FRONT |
| CLRHH1562165J5J |
CLR-HH-156-216-5J5J |
| CLRHH1562405J5J |
FIXTURE HOSE 5/32 in. I.D. x 240 in |
| CLRHH1562525J5J |
CLR-HH-156-252-5J5J |
| CLRHH1563005J5J |
CLR-HH-156-300-5J5J |
| CLRHH1563605J5J |
CLR-HH-156-360-5J5J |
| CLRHTMBM060 |
INSTALLATION TOOL FOR CLR-916-F |
| CLRRSS60502010LSC |
HYD SLIDE 250 BAR 50MM STROKE |
| CLRRSS70502000 |
RS HYDRAULIC SLIDE, D.A., + 63/40 mm, STROKE 50 mm, STANDARD, PERBUNAN, 250 bar |
| CLRRSS72002010LSC |
HYDRAULIC SLIDE 200MM STROKE |
| CLRTC2500049060 |
tubing, 1/4 o.d. x .049 wall x 5 ft. long |
| CLRTC3125065060 |
CLR-TC-3125-065-060 Tubing, 5/16 O.D. x 0.065 wall, 60 inches 2" (5 ft nominal) (As of 12/13/2019, Formally known as CLR |
| CLRHTMBM080 |
INSTALLATION TOOL FOR CLR-906-F |
| CLRHTMBM100 |
Installation tool for CLR-926-F |
| CLRRM305011 |
RM MINI SLIDE, D.A., VITON, + 25/16 mm, STROKE 50 mm, 1 INDUCTIVE SENSOR ON THE RIGHT SIDE, 500 bar |
| CLRRM402512B |
RM MINI SLIDE, D.A., VITON, + 32/20 mm, STROKE 25 mm, 2 INDUCTIVE SENSORS ON THE RIGHT SIDE, O-RING, 500 bar |
| CLRRM402516B |
RM MINI SLIDE, D.A., VITON, + 32/20 mm, STROKE 25 mm, 2 INDUCTIVE SENSORS ON THE LEFT SIDE, O-RING, 500 bar |